Electromagnetism MCQs for MDCAT (Physics) – 89 with Answers

Practise 89 MDCAT Physics MCQs on Electromagnetism, arranged according to the PMDC MDCAT syllabus. This chapter covers the magnetic field due to currents, the force on a moving charge and on a current-carrying conductor, the solenoid, the motion of charged particles in fields, e/m of the electron, and galvanometers, ammeters and voltmeters.

Every question has an answer and a short explanation. Use practice mode for instant feedback, or take a timed test and review your answers at the end. Your progress is saved on this device. This page includes 10 new questions written by MDCAT City and 79 from our Physics question bank.

More chapters: all Physics MCQs, chapter by chapter.

Electromagnetism MCQs

The magnetic force on a charge moving parallel to a magnetic field is:

  1. Maximum
  2. Zero
  3. qvB
  4. Infinite

Answer: B

F = qvB sin θ and θ = 0°, so F = 0.

The SI unit of magnetic flux is the:

  1. Tesla
  2. Weber
  3. Henry
  4. Gauss

Answer: B

Magnetic flux Φ = BA is measured in webers; flux density is in tesla (Wb m⁻²).

A galvanometer is converted into an ammeter by connecting a:

  1. High resistance in series
  2. Low resistance in parallel (shunt)
  3. Capacitor in series
  4. High resistance in parallel

Answer: B

The shunt carries most of the current, protecting the galvanometer.

A galvanometer is converted into a voltmeter by connecting a:

  1. High resistance in series
  2. Low resistance in parallel
  3. Inductor in parallel
  4. Diode in series

Answer: A

The series resistance limits the current so the meter can read high voltages.

The force on a current-carrying wire in a magnetic field is greatest when the wire is:

  1. Parallel to the field
  2. At 45° to the field
  3. Perpendicular to the field
  4. Outside the field

Answer: C

F = BIL sin θ is maximum when θ = 90°.

The magnetic field around a long straight current-carrying wire forms:

  1. Straight lines parallel to the wire
  2. Concentric circles around the wire
  3. Spirals
  4. No pattern

Answer: B

Its direction is given by the right-hand grip rule.

The magnetic field inside a long current-carrying solenoid is:

  1. Zero
  2. Nearly uniform
  3. Strongest at the ends
  4. Circular

Answer: B

B = μ₀nI is uniform well inside the solenoid.

A charged particle moving at right angles to a uniform magnetic field moves in a:

  1. Straight line
  2. Circle
  3. Parabola
  4. Zigzag

Answer: B

The magnetic force is always perpendicular to velocity, acting as a centripetal force.

Two long parallel wires carrying currents in the same direction:

  1. Repel each other
  2. Attract each other
  3. Have no effect on each other
  4. Rotate

Answer: B

Like currents attract; opposite currents repel.

A cathode-ray oscilloscope (CRO) works by deflecting a beam of:

  1. Protons
  2. Electrons
  3. Neutrons
  4. Light

Answer: B

Plates deflect the electron beam to trace a voltage on the screen.

The direction of the magnetic field around a current-carrying wire is given by the:

  1. Left-hand rule
  2. Right-hand grip rule
  3. Lenz’s law
  4. Ohm’s law

Answer: B

Thumb along the current, fingers curl in the field direction.

Magnetic fields are produced by:

  1. Stationary charges
  2. Moving electric charges
  3. Neutrons only
  4. Gravity

Answer: B

Currents and moving charges create magnetic fields.

The magnetic field inside a solenoid can be increased by:

  1. Reducing the current
  2. Increasing the number of turns per unit length
  3. Using a wooden core
  4. Shortening the wire only

Answer: B

B = μ₀nI.

Fleming’s left-hand rule gives the direction of the:

  1. Induced current in a generator
  2. Force on a current-carrying conductor in a magnetic field
  3. Electric field
  4. Earth’s magnetic field

Answer: B

First finger = field, second finger = current, thumb = motion (force).

A magnetic force does no work on a moving charge because the force is always:

  1. Parallel to velocity
  2. Perpendicular to velocity
  3. Zero
  4. Equal to gravity

Answer: B

It changes direction but not speed.

The charge-to-mass ratio (e/m) of the electron was first measured by:

  1. Millikan
  2. J. J. Thomson
  3. Rutherford
  4. Bohr

Answer: B

Thomson used crossed electric and magnetic fields.

In a moving-coil galvanometer, a radial magnetic field ensures that the deflection is:

  1. Independent of current
  2. Proportional to the current
  3. Inversely proportional to current
  4. Always maximum

Answer: B

The coil plane stays parallel to the field, giving a linear scale.

PMC Practice Test What is the radius of circular path, if particle has mass m and charge q

  1. R=qb/m
  2. R=mv/B
  3. R= mv/qB
  4. R=mvr/qB

Answer: C

PMC Practice Test An electron and a proton with the same momentum enter a uniform magnetic field perpendicularly. Then:

  1. Path of proton will be more curved
  2. Path of electron will be more curved
  3. Both have same curved path
  4. Path of both will straight line

Answer: C

PMC Practice Test A current-carrying loop behaves like a magnetic:

  1. Monopole
  2. Dipole
  3. Quadrupole
  4. Octopole

Answer: B

PMC Practice Test What is the magnitude of the magnetic field B = (0.3i + 0.4j) T?

  1. 5 T
  2. 2.5 T
  3. 0.5 T
  4. 2 T

Answer: C

PMC Practice Test In the Lorentz force, the magnetic force is a:

  1. Work force
  2. Deflecting force
  3. Resistive force
  4. None of these

Answer: B

PMC Practice Test The Lorentz force on a charge in electric and magnetic fields is:

  1. F = qv(E + B)
  2. F = qE(v + B)
  3. F = qvB
  4. F = q(E + v × B)

Answer: D

PMC Practice Test If the magnetic field is doubled, the magnetic energy density becomes:

  1. Four times
  2. Two times
  3. Three times
  4. Six times

Answer: A

PMC Practice Test Magnetic flux is the scalar product of:

  1. B and v
  2. B and A
  3. B and I
  4. None of these

Answer: B

PMC Practice Test An electron moves along a magnetic field line in a field B with velocity u. The magnetic force on it is:

  1. Bue
  2. Be/u
  3. Bu/q
  4. 0

Answer: D

PMC Practice Test Find the magnetic force on a charge of 3.5 C moving at 2 m/s perpendicular to a magnetic field of 4 T.

  1. 14 N
  2. 28 N
  3. 7 N
  4. 32 N

Answer: B

PMC Practice Test The force on a moving charge in a uniform magnetic field is maximum when the angle between v and B is:

  1. 0°
  2. 30°
  3. 60°
  4. 90°

Answer: D

PMC Practice Test When a charged particle enters a magnetic field with its velocity perpendicular to the field, its path is:

  1. Circular
  2. Parabolic
  3. Elliptical
  4. Hyperbolic

Answer: A

PMC Practice Test A substance is paramagnetic if its atoms have a net:

  1. Electric field
  2. Paired valence electrons
  3. Magnetic moment
  4. None of these

Answer: C

PMC Practice Test A solenoid bent into a circle is called

  1. Resistor
  2. Capacitor
  3. Inductor
  4. Toroid

Answer: D

PMC Practice Test The sensitivity of a galvanometer is defined as:

  1. The deflection produced per unit micro ampere current
  2. The deflection per force
  3. Force per unit area
  4. None of them

Answer: A

PMC Practice Test SI unit of magnetic induction is

  1. Weber
  2. Gauss
  3. Tesla
  4. Maxwell

Answer: C

PMC Practice Test The unit of relative permeability is:

  1. Henry
  2. Henry/m
  3. Dimensionless
  4. Henry/sq. m

Answer: C

PMC Practice Test If the magnetic field is B = (i + 2j + k) T and the area vector is A = (2i + j + k) m², the magnetic flux is:

  1. 4 Wb
  2. 5 Wb
  3. 6 Wb
  4. 7 Wb

Answer: B

PMC Practice Test A steady current passing through a conductor produces

  1. Electric field
  2. Magnetic field
  3. Both of these
  4. None of these

Answer: B

PMC Practice Test The strength of a magnetic field is called the:

  1. Strength
  2. Flux
  3. Magnetic flux density
  4. Density

Answer: C

PMC Practice Test A wire 5 m long carrying 2 A is placed perpendicular to a 10 T magnetic field. The force on it is:

  1. 50 N
  2. 100 N
  3. 200 N
  4. 25 N

Answer: B

PMC Practice Test What is the strength of magnetic field known as

  1. Flux
  2. Density
  3. Magnetic strength
  4. Magnetic flux density

Answer: D

PMC Practice Test Weber is the unit of

  1. Magnetic flux
  2. Electric flux
  3. Both a orb
  4. None of these

Answer: A

PMC Practice Test An electric charge in uniform motion produces:

  1. Electric field
  2. Magnetic field
  3. Both of these
  4. None of these

Answer: C

PMC Practice Test Magnetic flux is the ___ product of B and A.

  1. Scalar (dot)
  2. Vector (cross)
  3. Simple
  4. None of these

Answer: A

PMC Practice Test If the magnetic field is B = (i + 5j + 2k) T and the area vector is A = (6i − 2j + 2k) m², the magnetic flux is:

  1. 10 Wb
  2. 15 Wb
  3. 20 Wb
  4. 0 Wb

Answer: D

PMC Practice Test A charged particle enters in a strong magnetic field, its K.E

  1. Decreases
  2. Increases then decreases
  3. Becomes zero
  4. Remains constant

Answer: D

PMC Practice Test The face of a coil carrying a clockwise current (as seen by the observer):

  1. Behaves like north pole
  2. Behaves like south pole
  3. Becomes magnet of varying poles
  4. Does not behaves like magnet

Answer: B

PMC Practice Test During the circular path in magnetic field, what is the magnetic force

  1. F=qB
  2. F=qB²
  3. F=qB/v
  4. F=qvB

Answer: D

PMC Practice Test Magnetic field is very strong where field lines are

  1. Zero
  2. Far apart
  3. Very close
  4. None of these

Answer: C

PMC Practice Test If the velocity of a charged particle makes an angle other than 0° or 90° with a uniform magnetic field, its path is:

  1. Circular
  2. Straight line
  3. Spherical
  4. Helical

Answer: D

PMC Practice Test For which angle between the area vector and the magnetic field is the flux maximum?

  1. 0 degree
  2. 90 degree
  3. 45 degree
  4. 60 degree

Answer: A

PMC Practice Test Magnetic field density outside the solenoid is

  1. Strong
  2. Infinite
  3. Negligible
  4. None of these

Answer: C

PMC Practice Test A strong magnetic field is applied on a stationary electron. Then the electron

  1. Moves in the direction of the field.
  2. Moves perpendicular to the direction of the field.
  3. Moves opposite to the direction of the field.
  4. Remains stationary.

Answer: D

PMC Practice Test A charge is moving with velocity v, it enters a uniform magnetic field B. The direction of vis perpendicular to B. What is the path of the charge particle inside the magnetic field?

  1. Parabolic
  2. Circular
  3. Parallel tov
  4. Parallel to E

Answer: B

PMC Practice Test Which, among the following qualities, is not affected by the magnetic field?

  1. Moving charge
  2. Charge in magnetic flux
  3. Current flowing in conductor
  4. Stationary charge

Answer: D

PMC Practice Test Do magnetic flux lines intersect?

  1. Yes
  2. No
  3. Depends on strength of field
  4. Cannot be determined

Answer: B

PMC Practice Test Galvanometer is an

  1. Electromechanical device
  2. Electrosolar device
  3. Electrothermal device
  4. None of them

Answer: A

PMC Practice Test Force experienced by charge particles in magnetic field is

  1. Perpendicular to velocity
  2. Perpendicular to field
  3. Parallel to field
  4. Perpendicular to velocity and field

Answer: D

PMC Practice Test Find the maximum force of the conductor having length 60cm, current 2.75A and flux density of 9 units.

  1. 14.85
  2. 18.45
  3. 84.25
  4. 7.325

Answer: A

PMC Practice Test One tesla is equal to:

  1. 100 N/(A m)
  2. 1 N/(A m)
  3. 0.1 N m/A
  4. 1 N m/A

Answer: B

PMC Practice Test Magnetic Force between two wires is inversely proportional to

  1. Distance
  2. Current on them
  3. Charge on them
  4. None of these

Answer: A

PMC Practice Test Magnetic field lines have a property that lines are

  1. Non intersecting
  2. Intersect near south pole
  3. Intersect near north pole
  4. Intersect every where

Answer: A

PMC Practice Test A charge of 2 C moving at 5 m/s enters a 3 T magnetic field at 30° to it. The force on it is:

  1. 10 N
  2. 15 N
  3. 20 N
  4. 30 N

Answer: B

PMC Practice Test The work done by the magnetic force on a charged particle moving perpendicular to a magnetic field is:

  1. Positive
  2. Zero
  3. Negative
  4. None of these

Answer: B

PMC Practice Test The magnetic force between two current-carrying wires is proportional to the:

  1. Distance
  2. Current on them
  3. Charge on them
  4. None of these

Answer: B

PMC Practice Test A square loop of side 2 m is placed perpendicular to a 5 T magnetic field. The magnetic flux through it is:

  1. 2.5 Wb
  2. 5 Wb
  3. 10 Wb
  4. 20 Wb

Answer: D

PMC Practice Test Magnetic field lines form loops from pole to pole.

  1. Open
  2. Closed
  3. Branched
  4. Opened or closed

Answer: B

PMC Practice Test One weber is equal to:

  1. 10 gauss
  2. 10⁸ maxwell
  3. 10⁻⁴ gauss
  4. 10⁴ maxwell

Answer: B

PMC Practice Test Magnetic field lines created by current carrying wire is

  1. Helical
  2. Elliptical
  3. Hyperbolic
  4. Circular

Answer: D

PMC Practice Test The unit of magnetic flux density is:

  1. Tesla
  2. Wb/m²
  3. N/(A m)
  4. All of these

Answer: D

PMC Practice Test When currents are moving in the same direction in two conductors, then the force will be

  1. Attractive
  2. Repulsive
  3. Retracting
  4. Opposing

Answer: A

PMC Practice Test Magnetic flux is given by the:

  1. Dot product of magnetic field and area vector
  2. Cross product of magnetic field and area vector
  3. Both of these
  4. None of these

Answer: A

PMC Practice Test Magnetic flux density is a

  1. Scalar quantity
  2. Vector quantity
  3. Sometimes scalar sometimes vector
  4. None of these

Answer: B

PMC Practice Test Can we see magnetic flux lines?

  1. Yes
  2. No
  3. Depends on strength of field
  4. Only when the field is large

Answer: B

PMC Practice Test A 2 C charge moves at 20 m/s parallel to a 4 T magnetic field. The force on it is:

  1. 160 N
  2. 120 N
  3. 0 N
  4. 100 N

Answer: C

PMC Practice Test What happens to the flux if the magnetic field through the same surface is doubled?

  1. Becomes half
  2. Becomes twice
  3. Becomes infinite
  4. Becomes 4 times

Answer: B

PMC Practice Test Magnetic flux is the dot product of magnetic induction and the:

  1. Area
  2. Vector area
  3. Unit area
  4. None of these

Answer: B

PMC Practice Test The magnetic force is simply a:

  1. Reflecting force
  2. Deflecting force
  3. Restoring force
  4. Gravitational force

Answer: B

PMC Practice Test A 1 nC charge moves antiparallel to magnetic field lines. The magnetic force on it is:

  1. 0
  2. VB
  3. VB sin θ
  4. QvB

Answer: A

PMC Practice Test Is it possible to separate only the north pole from a bar magnet?

  1. Yes
  2. No
  3. In some cases it is possible
  4. None of these

Answer: B

PMC Practice Test Outside a magnet, magnetic field lines run from:

  1. North to south
  2. South to north
  3. East to west
  4. West to east

Answer: A

The magnetic force on a charge q moving with velocity v in a magnetic field B is:

  1. qB/v
  2. qvB cos θ
  3. qvB sin θ
  4. qE

Answer: C

F = q(v × B), with magnitude qvB sin θ.

The SI unit of magnetic flux density is the:

  1. Gauss
  2. Tesla
  3. Weber
  4. Henry

Answer: B

1 T = 1 N A⁻¹ m⁻¹ = 1 Wb m⁻².

A charged particle moving parallel to a magnetic field experiences:

  1. Maximum force
  2. A force towards the centre
  3. A force opposite to its velocity
  4. Zero force

Answer: D

θ = 0°, so F = qvB sin 0° = 0.

The magnetic field inside a long solenoid is:

  1. nI / μ₀
  2. μ₀I / 2r
  3. μ₀I / 2πr
  4. μ₀nI

Answer: D

n is the number of turns per unit length.

The force on a straight conductor of length L carrying current I in a field B is:

  1. IB/L
  2. ILB sin θ
  3. I/LB
  4. LB/I

Answer: B

F = I(L × B).

A galvanometer is converted into an ammeter by connecting a:

  1. Capacitor in series
  2. Low resistance (shunt) in parallel
  3. High resistance in parallel
  4. High resistance in series

Answer: B

Most of the current bypasses the galvanometer through the shunt.

A galvanometer is converted into a voltmeter by connecting a:

  1. Shunt in series
  2. High resistance in series
  3. Capacitor in parallel
  4. Low resistance in parallel

Answer: B

The high series resistance limits the current through the galvanometer.

The magnetic field at a distance r from a long straight wire carrying current I is:

  1. μ₀I / 2πr
  2. μ₀Ir
  3. μ₀I / r²
  4. μ₀nI

Answer: A

The field lines are concentric circles around the wire.

The charge-to-mass ratio (e/m) of the electron was first measured by:

  1. Rutherford
  2. J.J. Thomson
  3. Faraday
  4. Millikan

Answer: B

Thomson used crossed electric and magnetic fields in 1897.

Two long parallel wires carrying currents in the same direction:

  1. Repel each other
  2. Attract each other
  3. Exert no force on each other
  4. Rotate

Answer: B

Like currents attract; opposite currents repel.

Contact Form