Practise 145 MDCAT Biology MCQs on Enzymes, arranged according to the PMDC MDCAT syllabus. This chapter covers how enzymes lower activation energy, the lock-and-key and induced-fit models, cofactors and coenzymes, the effects of temperature, pH and substrate concentration, and competitive, non-competitive and feedback inhibition.
Every question has an answer and a short explanation. Use practice mode for instant feedback, or take a timed test and review your answers at the end. Your progress is saved on this device. This page includes 12 new questions written by MDCAT City and 133 from our Biology question bank.
More chapters: all Biology MCQs, chapter by chapter.
Enzymes MCQs
Enzymes speed up reactions by:
- Raising temperature
- Lowering activation energy
- Increasing the amount of product
- Changing the equilibrium
Answer: B
An enzyme provides an alternative pathway with a lower activation energy; it does not change the equilibrium position.
A competitive inhibitor binds to the enzyme’s:
- Active site
- Allosteric site
- Product
- Coenzyme
Answer: A
A competitive inhibitor resembles the substrate and competes for the active site.
A non-protein organic group that is tightly bound to an enzyme is called a:
- Prosthetic group
- Apoenzyme
- Holoenzyme
- Substrate
Answer: A
Tightly bound cofactors are prosthetic groups; loosely attached organic cofactors are coenzymes.
The protein part of an enzyme without its cofactor is the:
- Holoenzyme
- Apoenzyme
- Isoenzyme
- Zymogen
Answer: B
Apoenzyme + cofactor = holoenzyme (the active enzyme).
The lock-and-key model of enzyme action was proposed by:
- Koshland
- Emil Fischer
- Louis Pasteur
- Gregor Mendel
Answer: B
Fischer proposed the lock-and-key model; Koshland later proposed the induced-fit model.
The optimum pH for pepsin is about:
- 2
- 7
- 8.5
- 11
Answer: A
Pepsin works in the acidic stomach, with an optimum around pH 2.
Most enzymes are:
- Carbohydrates
- Proteins
- Lipids
- Nucleic acids
Answer: B
Almost all enzymes are globular proteins (a few RNA molecules also act as catalysts).
Heating an enzyme far above its optimum temperature usually:
- Speeds it up permanently
- Denatures it
- Has no effect
- Turns it into a substrate
Answer: B
High temperature breaks the bonds holding the active site in shape.
A non-competitive inhibitor binds to:
- The active site
- A site other than the active site
- The substrate
- The product
Answer: B
It binds elsewhere (an allosteric site) and changes the shape of the active site.
The induced-fit model of enzyme action was proposed by:
- Emil Fischer
- Daniel Koshland
- Louis Pasteur
- Robert Hooke
Answer: B
Koshland suggested the active site changes shape slightly to fit the substrate.
An enzyme acts on only one type of substrate because of the:
- Size of the enzyme
- Shape of its active site
- Temperature
- Amount of product
Answer: B
The active site is complementary in shape to its specific substrate.
The enzyme that breaks down hydrogen peroxide into water and oxygen is:
- Amylase
- Catalase
- Lipase
- Pepsin
Answer: B
Catalase protects cells from toxic hydrogen peroxide.
At very high substrate concentrations, the rate of an enzyme reaction:
- Keeps rising in a straight line
- Levels off because all active sites are occupied
- Drops to zero
- Doubles
Answer: B
The enzyme becomes saturated and works at maximum rate.
Inorganic cofactors of enzymes are usually:
- Vitamins
- Metal ions
- Amino acids
- Fatty acids
Answer: B
Examples include Mg²⁺, Zn²⁺ and Fe²⁺.
The names of most enzymes end in:
- -ose
- -ase
- -ide
- -ine
Answer: B
For example, lipase, maltase and protease.
In feedback inhibition, the enzyme pathway is slowed by:
- The first substrate
- The end product of the pathway
- Water
- Heat
Answer: B
The final product inhibits an enzyme early in the pathway.
Heavy metal ions such as Hg²⁺ usually inhibit enzymes by:
- Acting as substrates
- Binding permanently and changing enzyme shape
- Increasing temperature
- Adding water
Answer: B
They bind irreversibly, often to –SH groups, altering the active site.
PMC Practice Test Protein component of enzyme is called:
- Coenzyme
- Cofactor
- Apo-enzyme
- Prosthetic group
Answer: C
PMC Practice Test Catalytic activity of enzyme is enhanced by:
- Activator
- Coenzyme
- Co-factor
- BothAandB
Answer: D
PMC Practice Test A small organic, non-protein molecule that carries chemical groups between enzymes is a:
- Cofactor
- Catalyst
- Substrate
- Coenzyme
Answer: D
PMC Practice Test The optimum pH for the enzyme arginase is:
- 9.0
- 9.3
- 9.7
- 10
Answer: C
PMC Practice Test Which enzyme causes the hydrolysis of fats?
- Urease
- Lipase
- Maltase
- Protease
Answer: B
PMC Practice Test Enzymes are ___ in nature.
- Proteins
- Carbohydrates
- Lipids
- Nucleic acid
Answer: A
PMC Practice Test What is the optimum temperature for enzymes working in the human body?
- 40 °C
- 35 °C
- 37 °C
- 32 °C
Answer: C
PMC Practice Test In mixed inhibition, the inhibitor binds on the enzyme?
- Allosterically
- Active site
- Doesn't bind on the enzyme
- Binds on the substrate
Answer: A
PMC Practice Test In non-competitive inhibition, the quantity which remains same as the reaction proceed is?
- Vmax
- Km
- Ko
- Vo
Answer: B
PMC Practice Test Which one forms the raw material for coenzymes?
- Vitamins
- Carbohydrates
- Lipids
- Proteins
Answer: A
PMC Practice Test Allosteric enzymes consist of multiple?
- Inhibitors
- Polypeptide chains
- Active sites
- Temperature ranges
Answer: B
PMC Practice Test What affect do enzymes have on the activation energy of a reaction?
- Increases
- Decreases
- No affect
- Increases or decreases depending upon individual enzyme
Answer: B
PMC Practice Test An enzyme is said to be denatured in the presence of?
- No cofactor
- Low temperature
- Extremely high temperature
- None of these
Answer: C
PMC Practice Test Which term is used to refer to an inactive enzyme precursor?
- Apoenzyme
- Null enzyme
- Zymogen
- Inhibitor
Answer: C
PMC Practice Test The temperature at which enzyme activity is maximum is called the:
- Maximum temperature
- Absolute temperature
- Critical temperature
- Optimum temperature
Answer: D
PMC Practice Test Proteases are an example of:
- Lyases
- Hydrolases
- Ligases
- Transferases
Answer: B
PMC Practice Test Number of substrate molecules converted into product by one molecule of enzyme active site per unit time is called?
- Turnover number
- Substrate number
- Reaction number
- None of these
Answer: A
PMC Practice Test The primary function of cofactors is to?
- Assist in enzyme synthesis
- Assist in enzyme inhibition
- Assist in enzyme activity
- Both aand b
Answer: C
PMC Practice Test A cofactor made of a detachable inorganic ion is called a/an:
- Prosthetic group
- Coenzyme
- Activator
- Cofactor
Answer: C
PMC Practice Test Enzymes that catalyze hydrolysis:
- Oxidoreductase
- Hydrolases
- Ligases
- Transferases
Answer: B
PMC Practice Test NAD contains which vitamin?
- B1
- B2
- C
- B3
Answer: D
PMC Practice Test The rate of an enzyme-catalysed reaction directly depends on:
- Low temperature
- Nature of the substrate
- Maximum pH level
- Amount of enzyme present
Answer: D
PMC Practice Test An inhibitor disrupts the function of an enzyme. When more substrate is added, the enzyme's function is restored. What type of inhibitor is it?
- Noncompetitive
- Uncompetitive
- Allosteric
- Competitive
Answer: D
PMC Practice Test An active enzyme consisting of the polypeptide chain together with its cofactor is called a/an:
- Apoenzyme
- Holoenzyme
- Coenzyme
- Prosthetic group
Answer: B
PMC Practice Test Which statement about enzymes is FALSE?
- Substrates must bind the enzyme
- Enzymes increase the rate of both forward and reverse reactions
- Enzymes are not used up in a reaction
- Enzymes increase the amount of product formed at equilibrium
Answer: D
PMC Practice Test Carboxylases are an example of which type of enzyme?
- Hydrolases
- Lyases
- Transferases
- Ligases
Answer: D
PMC Practice Test The lock and key model of enzyme action was proposed by:
- Louis Pasteur
- Emil Fischer
- Daniel Koshland
- Urey Miller
Answer: B
PMC Practice Test The enzyme increases the rate of reaction by which of the following?
- Decreasing kinetic energy
- Decreasing chemical energy
- Decreasing potential energy
- Decreasing activation energy
Answer: D
PMC Practice Test Enzyme-substrate specificity is a result of which property of enzymes?
- The primary structure of enzymes.
- The secondary structure of enzymes.
- Tertiary structure of enzymes.
- Quaternary structure of enzymes.
Answer: C
PMC Practice Test Enzymes which bring about exchange of functional group is called :
- Oxidoreductase
- Hydrolases
- Ligases
- Transferases
Answer: D
PMC Practice Test In an enzymatic mechanism, the substrate binds to the enzyme's active site to produce:
- Reactants
- Enzymes
- Products
- All of these
Answer: C
PMC Practice Test A substance which binds at the active site of the enzyme but does not result in the formation of the products is called?
- Irreversible inhibitor
- Reversible inhibitor
- Non-competitive inhibitor
- Competitive inhibitor
Answer: D
PMC Practice Test The specific site at which substrate is attached on the enzyme and converted into product is called as__?
- Reaction site
- Active site
- Binding site
- None of these
Answer: B
PMC Practice Test A non-protein part conjugated with a protein (enzyme) is called a:
- Coenzyme
- Co-factor
- Prosthetic group
- None
Answer: C
PMC Practice Test The substrate binds to specific region of enzyme called?
- Key
- Active site
- Hyperactive site
- None of these
Answer: B
PMC Practice Test Feedback inhibition in most metabolic pathways involves which type of enzymes?
- Holoenzymes
- Coenzymes
- Apoenzymes
- Allosteric enzymes
Answer: D
PMC Practice Test If the non-protein part of an enzyme is covalently bonded to it, it is known as a:
- Coenzyme
- Cofactor
- Prosthetic group
- Activator
Answer: C
PMC Practice Test Which enzyme is raised in rickets?
- Alkaline phosphatase
- LDH-1
- Acidic phosphatase
- None
Answer: A
PMC Practice Test What is meant by enzyme denaturation?
- Peptide bonds between amino acid residues are broken.
- The enzyme loses its secondary structure.
- The enzyme loses its tertiary structure.
- All of the above.
Answer: C
PMC Practice Test If the non-protein part is loosely attached to the protein part of an enzyme, it is known as a:
- Coenzyme
- Prosthetic group
- Cofactor
- Apoenzyme
Answer: A
PMC Practice Test How do competitive inhibitors affect enzyme efficiency?
- Raise the maximum rate of the enzymatic reaction
- Lower the maximum rate of the enzymatic reaction
- Lower the Michaelis constant
- Raise the Michaelis constant
Answer: D
PMC Practice Test When the end product of an enzymatic pathway inhibits an enzyme of an earlier step, the regulation is called:
- Allosteric regulation
- Negative regulation
- Metabolic pathway loop
- Feedback inhibition
Answer: D
PMC Practice Test The activator of the phosphatase enzyme is:
- Mn²⁺
- Mg²⁺
- Zn²⁺
- None of these
Answer: B
PMC Practice Test The catalytic activity of an enzyme is restricted to a small portion of it called the:
- Intermediate site
- Active site
- Passive site
- Both A and B
Answer: B
PMC Practice Test Competitive inhibition can be overcome by using a:
- Low concentration of substrate
- High concentration of inhibitor
- Moderate concentration of inhibitor
- High concentration of substrate
Answer: D
PMC Practice Test The complex that forms when a substrate binds to enzyme is called?
- Enzyme-substrate complex
- Enzyme complex
- Substrate complex
- Structural complex
Answer: A
PMC Practice Test Enzyme-catalysed modifications (of enzymes) can be:
- Reversible
- Irreversible
- Both A and B
- None of these
Answer: C
PMC Practice Test A competitive inhibitor affects enzyme activity by:
- Increases enzyme activity
- Doesn't change enzyme activity
- Decreases enzyme activity
- None of these
Answer: C
PMC Practice Test Which of the following is NOT a class of enzymes?
- Ligase
- Hydrolase
- Isomerase
- Pyrimidine complex
Answer: D
PMC Practice Test The hydrolysis of urea is catalysed by:
- Amylase
- Urease
- Pectin
- None
Answer: B
PMC Practice Test Non-protein cofactors include organic and metallo-organic molecules, often derived from:
- Vitamins
- DNA
- Coenzyme
- None
Answer: A
PMC Practice Test Enzymes that catalyse the addition of ammonia, water or CO₂ to double bonds (or their removal) are:
- Lyases
- Hydrolases
- Ligases
- Transferases
Answer: A
PMC Practice Test Active form of an enzyme:
- Coenzyme
- Apoenzyme
- Holoenzyme
- Proenzyme
Answer: C
PMC Practice Test The reaction will proceed faster if the activation energy is?
- High
- Low
- Remains same
- None of these
Answer: B
PMC Practice Test Which statement about enzyme is incorrect?
- Some of them consist solely of protein with no non protein part.
- They catalyze a chemical reaction without being utilized.
- They without their cofactor are called apoenzyme.
- All enzymes are fibrous Proteins
Answer: D
PMC Practice Test A researcher has designed a new type of inhibitor that binds at the active site of an enzyme. What type of inhibition does this molecule display?
- Uncompetitive inhibition
- Noncompetitive inhibition
- Competitive inhibition
- All of these
Answer: C
PMC Practice Test The substances which reduces the activity of enzyme action are called as?
- Reducers
- Activators
- Promotors
- Inhibitors
Answer: D
PMC Practice Test Enzymes are?
- Non-specific in action
- Very reactive
- Highly specific
- Volatile
Answer: C
PMC Practice Test On which of the following factors rate of enzyme action is directly proportional?
- Concentration of products
- Time
- Concentration of substrate
- Concentration of solvent
Answer: C
PMC Practice Test Reversible inhibitors form Weak linkages with which of the following?
- Enzyme
- Reactant
- Product
- Substrate
Answer: A
PMC Practice Test In competitive inhibition, the two things that binds to enzyme active site are?
- Substrate
- Inhibitors
- Catalyst
- Both A and B
Answer: D
PMC Practice Test A non-protein chemical compound which is required for protein's biological activity is?
- Coenzyme
- Cofactor
- DNA
- RNA
Answer: B
PMC Practice Test In mixed inhibition, the allosteric affect effects
- Shape of substrate
- Shape of inhibitor
- Shape of enzyme
- None of these
Answer: C
PMC Practice Test If we add more substrate to already occurring enzymatic reaction and it has no affect on the rate of reaction, the process is called?
- Denaturation
- Saturation
- Composition
- Inhibition
Answer: B
PMC Practice Test The enzyme-substrate complex is formed in which part of the enzyme molecule?
- Binding site
- Allosteric site
- Catalytic site
- None of the above
Answer: A
PMC Practice Test These are biologically active proteins___
- Glycoprotein
- Enzymes
- Activators
- Inhibitors
Answer: B
PMC Practice Test An activated enzyme made of polypeptide chain and a cofactor is?
- Substrate
- Coenzyme
- Apoenzyme
- Holoenzyme
Answer: D
PMC Practice Test Which statement is true about noncompetitive inhibitors?
- They bind covalently to the enzyme and disrupt the substrate from attaching
- They bind at the active site of the enzyme
- They actively block the enzyme from attaching to the substrate.
- They alter the conformation of the enzyme.
Answer: D
PMC Practice Test Which enzyme is used for diagnosis of Jaundice?
- LDH-1
- Protease
- Alkaline phosphatase
- None of these
Answer: C
PMC Practice Test Which of the following causes the inactivation of enzymes?
- Concentration of substrate
- Optimum temperature
- Beta radiation
- Optimum pH
Answer: C
PMC Practice Test In non-competitive inhibition, the extent of inhibition depends only on?
- Concentration of enzyme
- Concentration of substrate
- Concentration of ES complex
- Concentration of inhibitor
Answer: D
PMC Practice Test In uncompetitive inhibition, the inhibitor binds with
- Enzyme
- Substrate
- ES-complex
- All of these
Answer: C
PMC Practice Test Enzyme which helps in changing the shape of molecule is called?
- Ligases
- Dehydrogenases
- Hydrolyses
- Isomerases
Answer: D
PMC Practice Test What type of inhibition effects both the Michaelis constant and the maximum reaction rate of an enzyme?
- Non-competitive inhibition
- Competitive inhibition
- Uncompetitive inhibition
- All of these
Answer: C
PMC Practice Test If temperature of reaction medium increases above optimum temperature then?
- It increases the enzyme activity
- It may stop the reaction
- It decreases the enzyme activity
- Both B and C
Answer: D
PMC Practice Test ___ catalyses the conversion of hexoses into their 6-phosphate derivatives.
- Hexokinase
- Glucokinase
- Fructokinase
- Malonic acid
Answer: A
PMC Practice Test What is meant by optimum temperature of an enzyme?
- The temperature at which the primary structure of an enzyme remains intact.
- The temperature at which an enzyme makes the maximum amount of product.
- The temperature at which an enzyme may be more affected by an inhibitor.
- The temperature at which an enzyme makes the least amount of product.
Answer: B
PMC Practice Test An activated enzyme consisting of polypeptide chain and a cofactor is called?
- Apoenzyme
- Holoenzyme
- Activated enzyme
- Both b andc
Answer: B
PMC Practice Test What does the active site of the enzyme determine?
- Looks like a lump projection from the surface of an enzyme
- Forms no chemical bond with substrate
- Never changes
- Determines by its structure the specificity of an enzyme
Answer: D
PMC Practice Test How many classes of enzymes are there according to International union of Biochemistry?
- Four
- Six
- Five
- Two
Answer: B
PMC Practice Test The non substrate molecules that binds to the allosteric sites are called?
- Inhibitors
- Reactants
- Allosteric substrates
- Allosteric modulators
Answer: D
PMC Practice Test The specificity of an enzyme is due to which of the following?
- Protein nature
- Active site
- Globular shape
- Cofactor
Answer: B
PMC Practice Test The optimum pH for the functioning of the enzyme pepsin is?
- 2
- 3
- 4
- 5
Answer: A
PMC Practice Test Protein component of enzyme is called x
- Coenzyme
- Cofactor
- Apo-enzyme
- Prosthetic group
Answer: C
PMC Practice Test Which of the following best describes a coenzyme?
- Covalently bonded non-protein part of an enzyme
- Cofactor consists of metal ions
- Loosely bonded non-protein part of an enzyme
- Both A and B
Answer: C
PMC Practice Test The substance that is attached to the enzyme at specific place and converted into product is called as?
- Co-factor
- Lso-zyme
- Active site
- Substrate
Answer: D
PMC Practice Test What type of bonds exist between an enzyme and its prosthetic group?
- Ionic
- Covalent
- Hydrogen
- Metallic
Answer: B
PMC Practice Test Upon increasing the temperature the shape of enzyme's active site?
- Remains same
- Changes
- Adopts a geometric conformation
- Denatures
Answer: B
PMC Practice Test The enzyme involved in splitting or formation of C-C bond is called?
- Oxidases
- Dehydrogenases
- Transglycosidases
- Desmolases
Answer: D
PMC Practice Test Cofactors can be divided into how many groups?
- 2
- 4
- 6
- 8
Answer: A
PMC Practice Test In addition to active site, allosteric enzymes contain?
- Inhibitors
- Substrate
- Allosteric site
- Polypeptide chains
Answer: C
PMC Practice Test What type of enzymes are involved in biological oxidation?
- Kinases
- Dehydrogenases
- Polymerases
- Phosphatases
Answer: B
PMC Practice Test While bound to the active site, the substrate is converted into which of the following?
- Complex
- Substrate of high energy
- Product of reaction
- Both A and B
Answer: C
PMC Practice Test Which step causes activation of catalytic site of an enzyme?
- Change in pH of the surroundings.
- Change in the charge of the active site.
- Change in temperature
- Formation of Enzyme Substrate complex
Answer: D
PMC Practice Test The substrate concentration that produces exactly half of the maximum reaction rate can be described by?
- Michaelis equation
- Menten equation
- Bernoulli equation
- Michaelis-Menten equation
Answer: D
PMC Practice Test Biological molecules which catalyze a biochemical reaction and remain unchanged after completion of reaction are called?
- Cofactor
- Coenzymes
- Activator
- Enzymes
Answer: D
PMC Practice Test In enzyme catalytic reaction the substrate is first converted to a high energy state called?
- Transition state
- High energy state
- Activation state
- Breaking point
Answer: A
PMC Practice Test Enzymes which are involved in transfer of electrons are known as?
- Oxidases
- Dehydrogenases
- Hydrolyses
- Both A and B
Answer: D
PMC Practice Test Glucose is converted into ethanol by the enzyme present in yeast.
- Invertase
- Urease
- Glyoolysis
- Zymase
Answer: D
PMC Practice Test Isoenzymes catalyse:
- Catalyze different reaction
- Catalyze same reaction
- Catalyze any reaction
- Catalyze reactions that are from different reactions
Answer: B
PMC Practice Test Which is true of the induced-fit model?
- The substrate changes its shape slightly
- The enzyme changes its shape slightly
- None of them changes shape
- Both changes shapes
Answer: B
PMC Practice Test Catalysts that increase the rate of biological chemical reaction are called?
- Proteins
- Vitamines
- Enzymes
- Minerals
Answer: C
PMC Practice Test According to the lock-and-key model, the substrate acts as the:
- Lock
- Key
- Both A and B
- None of these
Answer: B
PMC Practice Test Competitive inhibitors and the real substrate often have a similar:
- Structure
- Chemical properties
- Physical properties
- None of these
Answer: A
PMC Practice Test The lock-and-key model was proposed by:
- Koshland
- Robin Williams
- Rudolph Virchow
- Emil Fischer
Answer: D
PMC Practice Test Enzymes do NOT change the:
- Conc. Of reactants
- Conc. Of products
- Keq
- Both A and B
Answer: C
PMC Practice Test The activator of the carbonic anhydrase enzyme is:
- Mn²⁺
- Mg²⁺
- Zn²⁺
- None of these
Answer: C
PMC Practice Test Transmethylases help in the transfer of a/an:
- Methyl group
- Ethyl group
- Amino group
- Acetyl group
Answer: A
PMC Practice Test Dehydrogenase is an example of which class of enzymes?
- Oxidoreductase
- Hydrolases
- Ligases
- Transferases
Answer: A
PMC Practice Test How many models represent the enzyme–substrate interaction?
- 1
- 2
- 3
- 4
Answer: B
PMC Practice Test ___ is a competitive inhibitor of succinic dehydrogenase.
- Malonic acid
- Malic acid
- Fumaric acid
- Acetic acid
Answer: A
PMC Practice Test Enzymes are also called:
- Catalyst
- Lipoproteins
- Conjugated molecules
- Biocatalyst
Answer: D
PMC Practice Test Which enzyme is used in the treatment of cancer (leukaemia) in children?
- Thrombin
- L- asparaginase
- Both
- None of these
Answer: B
PMC Practice Test An enzyme without its cofactor is called a/an:
- Coenzyme
- Apoenzyme
- Holoenzyme
- Proenzyme
Answer: B
PMC Practice Test The raw materials for (many) coenzymes are:
- Proteins
- Vitamins
- Lipids
- Both A and B
Answer: B
PMC Practice Test The chemical reactant that binds to an enzyme is known as the:
- Product
- Reactant
- Substrate
- All of these
Answer: C
Enzymes speed up reactions by:
- Changing the equilibrium constant
- Raising the activation energy
- Lowering the activation energy
- Supplying energy to the reaction
Answer: C
Enzymes lower the activation energy; they do not change the overall energy change or the equilibrium.
The region of an enzyme where the substrate binds is the:
- Active site
- Coenzyme
- Allosteric site
- Prosthetic group
Answer: A
The substrate binds at the active site, which has a complementary shape.
The induced fit model of enzyme action was proposed by:
- Gregor Mendel
- Louis Pasteur
- Daniel Koshland
- Emil Fischer
Answer: C
Koshland proposed that the active site changes shape slightly to fit the substrate (induced fit).
A competitive inhibitor:
- Competes with the substrate for the active site
- Increases Vmax
- Binds to an allosteric site
- Permanently denatures the enzyme
Answer: A
Competitive inhibitors resemble the substrate and bind to the active site; raising substrate concentration overcomes them.
Increasing substrate concentration can overcome the effect of:
- Denaturation
- Non-competitive inhibition
- Competitive inhibition
- Irreversible inhibition
Answer: C
With more substrate, substrate molecules outcompete a competitive inhibitor for the active site.
Most human enzymes work best at a temperature of about:
- 25 °C
- 37 °C
- 60 °C
- 80 °C
Answer: B
Human enzymes have an optimum temperature near body temperature, about 37 °C.
Pepsin works best at a pH of about:
- 2
- 7
- 8.5
- 11
Answer: A
Pepsin works in the acidic stomach, with an optimum pH of about 2.
A non-protein organic molecule loosely attached to an enzyme and needed for its activity is a:
- Apoenzyme
- Prosthetic group
- Substrate
- Coenzyme
Answer: D
Coenzymes such as NAD+ are organic cofactors that bind loosely; prosthetic groups bind tightly.
An enzyme without its cofactor is called:
- Holoenzyme
- Zymogen
- Isoenzyme
- Apoenzyme
Answer: D
Apoenzyme + cofactor = holoenzyme (the active enzyme).
High temperature inactivates enzymes because it:
- Breaks peptide bonds
- Changes the shape of the active site (denaturation)
- Adds more substrate
- Converts the enzyme into a coenzyme
Answer: B
Heat breaks the weak bonds that hold the 3D shape, so the active site is lost (denaturation).
Feedback inhibition usually occurs when the end product of a pathway:
- Inhibits an enzyme early in the pathway
- Raises the temperature
- Activates the first enzyme
- Destroys the substrate
Answer: A
The end product binds (often allosterically) to an early enzyme and slows the pathway down.
Enzymes are classified mainly according to the:
- Type of reaction they catalyse
- Organ that produces them
- Size of the enzyme
- Temperature they work at
Answer: A
The international classification groups enzymes by reaction type, e.g. oxidoreductases, hydrolases.