Gases, Liquids and Solids MCQs for MDCAT (Chemistry) – 202 with Answers

Practise 202 MDCAT Chemistry MCQs on Gases, Liquids and Solids, arranged according to the PMDC MDCAT syllabus. This chapter covers the gas laws (Boyle's, Charles's, Avogadro's), the ideal gas equation, Graham's law of diffusion, kinetic molecular theory, non-ideal behaviour, vapour pressure and boiling, intermolecular forces and crystal structures.

Every question has an answer and a short explanation. Use practice mode for instant feedback, or take a timed test and review your answers at the end. Your progress is saved on this device. This page includes 10 new questions written by MDCAT City and 192 from our Chemistry question bank.

More chapters: all Chemistry MCQs, chapter by chapter.

Gases, liquids and solids MCQs

Boyle’s law states that, at constant temperature:

  1. V ∝ T
  2. P ∝ T
  3. P ∝ 1/V
  4. V ∝ n

Answer: C

For a fixed mass of gas at constant temperature, pressure is inversely proportional to volume.

Charles’s law states that, at constant pressure, the volume of a gas is proportional to its:

  1. Celsius temperature
  2. Absolute (kelvin) temperature
  3. Density
  4. Molar mass

Answer: B

V ∝ T only when T is measured in kelvin.

Absolute zero on the Celsius scale is:

  1. 0 °C
  2. −100 °C
  3. −273.15 °C
  4. −373 °C

Answer: C

0 K = −273.15 °C.

The value of the gas constant R in SI units is:

  1. 8.314 J K⁻¹ mol⁻¹
  2. 0.0821 J K⁻¹ mol⁻¹
  3. 1.987 J K⁻¹ mol⁻¹
  4. 22.4 J K⁻¹ mol⁻¹

Answer: A

R = 8.314 J K⁻¹ mol⁻¹ (0.0821 is in dm³ atm K⁻¹ mol⁻¹, 1.987 is in cal K⁻¹ mol⁻¹).

The strongest intermolecular force in water is:

  1. London dispersion forces
  2. Hydrogen bonding
  3. Dipole–induced dipole
  4. Ionic bonding

Answer: B

Hydrogen bonds between H₂O molecules explain water’s unusually high boiling point.

A liquid boils when its vapour pressure becomes equal to:

  1. Zero
  2. The external pressure
  3. Its critical pressure
  4. Half the atmospheric pressure

Answer: B

That is why water boils below 100 °C at high altitude, where the external pressure is lower.

Sodium chloride is an example of a(n):

  1. Molecular crystal
  2. Covalent network crystal
  3. Ionic crystal
  4. Metallic crystal

Answer: C

NaCl is made of Na⁺ and Cl⁻ ions held by ionic bonds in a regular lattice.

Which gas diffuses fastest at the same temperature?

  1. Hydrogen
  2. Helium
  3. Methane
  4. Oxygen

Answer: A

Graham’s law: rate ∝ 1/√M, and H₂ has the smallest molar mass (2).

Dalton’s law of partial pressures states that the total pressure of a gas mixture:

  1. Equals the pressure of the heaviest gas
  2. Equals the sum of the partial pressures
  3. Depends only on temperature
  4. Is always 1 atm

Answer: B

P(total) = P₁ + P₂ + P₃ + …

Real gases deviate most from ideal behaviour at:

  1. Low pressure and high temperature
  2. High pressure and low temperature
  3. Low pressure and low temperature
  4. Room conditions only

Answer: B

Molecules are close together, so their volume and attractions matter.

Diamond is an example of a:

  1. Molecular solid
  2. Ionic solid
  3. Covalent network solid
  4. Metallic solid

Answer: C

Each carbon is covalently bonded to four others in a giant 3D network.

Ice floats on water because:

  1. Ice is a gas
  2. Hydrogen bonding gives ice an open structure that is less dense than water
  3. Ice contains air bubbles only
  4. Water has no hydrogen bonds

Answer: B

In ice, hydrogen bonds hold molecules in an open hexagonal lattice.

Glass is an example of a(n):

  1. Crystalline solid
  2. Amorphous solid
  3. Ionic crystal
  4. Liquid crystal only

Answer: B

Its particles have no long-range regular arrangement.

The average kinetic energy of gas molecules is proportional to the:

  1. Volume
  2. Absolute temperature
  3. Pressure only
  4. Molar mass

Answer: B

KE (average) = 3/2 kT.

The critical temperature of a gas is the temperature:

  1. At which it freezes
  2. Above which it cannot be liquefied by pressure alone
  3. At which it boils at 1 atm
  4. Below which it cannot exist

Answer: B

Above this temperature, no amount of pressure liquefies the gas.

As temperature increases, the viscosity of a liquid generally:

  1. Increases
  2. Decreases
  3. Stays the same
  4. Becomes infinite

Answer: B

Molecules move faster and slide past each other more easily.

Surface tension in liquids is caused by:

  1. Gravity
  2. Cohesive forces between molecules
  3. Air pressure
  4. Adhesion to the container only

Answer: B

Surface molecules are pulled inward by their neighbours.

Graphite conducts electricity because it has:

  1. Free ions
  2. Delocalised electrons between its layers
  3. Hydrogen bonds
  4. Metallic atoms

Answer: B

Each carbon uses three electrons in bonds; the fourth is delocalised.

The smallest repeating unit of a crystal lattice is called the:

  1. Molecule
  2. Unit cell
  3. Lattice point
  4. Crystal face

Answer: B

Repeating the unit cell in three dimensions builds the whole crystal.

Which substance sublimes when heated?

  1. Sodium chloride
  2. Iodine
  3. Water
  4. Copper

Answer: B

Iodine passes directly from solid to purple vapour.

PMC Practice Test Who attributed the deviation of real gases from ideal behavior

  1. Boyle's law
  2. Charles's law
  3. Avogadro's law
  4. Van der Waals

Answer: D

PMC Practice Test The forces of attraction in Molecular solids

  1. Strong
  2. Very Strong
  3. Weak
  4. Moderate

Answer: C

PMC Practice Test London forces of interaction form ___.

  1. Covalent crystals
  2. Ionic crystals
  3. Molecular crystals
  4. Metallic crystals

Answer: C

PMC Practice Test What is the correct relation between ΔH (of vaporization) and intermolecular forces?

  1. Higher ΔH, weaker intermolecular forces
  2. Higher ΔH, stronger intermolecular forces
  3. Lower ΔH, stronger intermolecular forces
  4. None of these

Answer: B

PMC Practice Test Which of the following solids shows hydrogen bonding

  1. Ionic
  2. Metallic
  3. Covalent
  4. Molecular

Answer: D

PMC Practice Test PV/nRT for an ideal gas is called

  1. Expansion factor
  2. Depression factor
  3. Compressibility factor
  4. Diffusion factor

Answer: C

PMC Practice Test The density of ice is:

  1. Higher than that of water
  2. Lower than that of water
  3. Similar to that of water
  4. Higher than 1.5 g/cm³

Answer: B

PMC Practice Test The mole fraction of a gas multiplied by the total pressure of the mixture is called the ___ of the gas.

  1. Partial volume
  2. Partial pressure
  3. Partial temperature
  4. Number of moles

Answer: B

PMC Practice Test What does the constant n represent in the equation of state for an ideal gas PV=nRT?

  1. Number of atoms in the gas
  2. Number of moles of the gas
  3. Number of nucleons
  4. Number of molecules of gas

Answer: B

PMC Practice Test A gas is at 3 atm. What will its pressure be if it expands to three times its volume at constant temperature?

  1. 1 atm
  2. 3 atm
  3. 6 atm
  4. 9 atm

Answer: A

PMC Practice Test If a graph is plotted between pressure (x-axis) and volume (y-axis) to verify Boyle's law, the curve obtained is called a/an:

  1. Pseudotherm
  2. Isotherm
  3. Biotherm
  4. All of these

Answer: B

PMC Practice Test The nature of amorphous solid is

  1. Isotropic
  2. Anisotropic
  3. Mesotrophic
  4. Neotropic

Answer: A

PMC Practice Test In Boyle's law, which quantity is constant

  1. P
  2. T
  3. Vv
  4. R

Answer: B

PMC Practice Test Asurfactant plays its role by:

  1. Decreasing surface tension
  2. Increasing surface tension
  3. No effect on surface tension
  4. None of these

Answer: A

PMC Practice Test On which factor does the vapour pressure of a substance NOT depend?

  1. Physical state of matter
  2. Intermolecular forces
  3. Surface area
  4. Temperature

Answer: C

PMC Practice Test Linde's method for liquefying gases is based on the:

  1. Joule–Thomson effect
  2. Hess effect
  3. Graham's effect
  4. None of these

Answer: A

PMC Practice Test Instantaneous dipole-Induced dipole forces are also named as?

  1. Debye forces
  2. Dipole-dipole forces
  3. London Dispersion forces
  4. H-bonding

Answer: C

PMC Practice Test Which of the following solids is isotropic?

  1. Ionic solids
  2. Molecular solids
  3. Amorphous solids
  4. Metallic solids

Answer: C

PMC Practice Test Which pair shows hydrogen bonding among them

  1. Ammonia & carbon
  2. Acetone and Ker
  3. Acetone and chloroform
  4. Water & Neon

Answer: C

PMC Practice Test NaNO₃ and CaCO₃ are:

  1. Allotropes
  2. Amorphous
  3. Isomorphous
  4. Polymorphous

Answer: C

PMC Practice Test The smallest part of a crystal lattice showing all the properties of the crystal is called the:

  1. Crystallite
  2. Unit cell
  3. Unit crystal
  4. Monomer

Answer: B

PMC Practice Test A sample of H₂ gas effuses four times as fast as the same volume of an unknown gas. The molar mass of the unknown gas is:

  1. 16 g/mol
  2. 32 g/mol
  3. 72 g/mol
  4. 48 g/mol

Answer: B

PMC Practice Test In the formation of a crystal lattice, energy is:

  1. Absorbed
  2. Released
  3. Dependent on Crystal Size
  4. None of these

Answer: B

PMC Practice Test The size and shape of a crystal depend on how many crystallographic elements?

  1. 3
  2. 4
  3. 6
  4. 8

Answer: C

PMC Practice Test Melting and boiling point of liquids depend upon -?

  1. Motion of liquid molecules
  2. Intermolecular forces between the molecules
  3. Kinetic energy of the molecules
  4. Mass of the molecules

Answer: B

PMC Practice Test Which of the following has the highest melting point?

  1. Diamond
  2. Sulphur
  3. Ice
  4. Zinc

Answer: A

PMC Practice Test Molecules of ___ can collide among themselves and exchange energy.

  1. Solids
  2. Liquids
  3. Gases
  4. Both B and C

Answer: D

PMC Practice Test When a liquid is heated in a closed container, equilibrium is established between:

  1. Liquid and Solid
  2. Liquid and Vapour
  3. Liquid solid and vapour
  4. Liquid and vapour solid

Answer: B

PMC Practice Test What type of movement is shown by the atoms of a solid?

  1. Translational motion
  2. Vibrational motion
  3. Rotational motion
  4. Linear motion

Answer: B

PMC Practice Test Intermolecular forces are also called:

  1. Chemical bond
  2. Intramolecular force
  3. Van der waal forces
  4. Strong forces

Answer: C

PMC Practice Test The strength of London forces depends on the size of the:

  1. Electrons
  2. Electronic cloud
  3. Lone pair on an atom
  4. Poles of atoms

Answer: B

PMC Practice Test The coordination number of Na⁺ in NaCl is:

  1. 4
  2. 6
  3. 8
  4. 3

Answer: B

PMC Practice Test Maximum hydrogen bonding is found in:

  1. Chlorine
  2. Ammonia
  3. Water
  4. Hydrochloric acid

Answer: C

PMC Practice Test What is the SI unit of pressure?

  1. N m⁻²
  2. N m²
  3. Mm of Hg
  4. Atm

Answer: A

PMC Practice Test Which of the following forces have no relation with valence electrons?

  1. Ionic Bond
  2. Chemical bond
  3. Intermolecular forces
  4. Intramolecular forces

Answer: C

PMC Practice Test The turbid liquid were also called liquid crystals due to presence of some degree of

  1. Heat
  2. Order
  3. Hotness
  4. Coldness

Answer: B

PMC Practice Test Cooling is caused by:

  1. Vapor pressure
  2. Evaporation
  3. Freezing
  4. None of these

Answer: B

PMC Practice Test What is the value of the universal gas constant in SI units?

  1. 8.314 J mol⁻¹ K⁻¹
  2. 8.314 dm³ atm mol⁻¹ K⁻¹
  3. 0.0821 dm³ atm mol⁻¹ K⁻¹
  4. 0.0821 J mol⁻¹ K⁻¹

Answer: A

PMC Practice Test Which of the following has more evaporation rate at same temperature?

  1. Gasoline
  2. Water
  3. Honey
  4. Ethanol

Answer: A

PMC Practice Test Which of the following consists of discrete molecules?

  1. Sodium chloride
  2. Dry ice
  3. Copper
  4. CaO

Answer: B

PMC Practice Test The forces present between the molecules are called as?

  1. Chemical bond
  2. Intermolecular forces
  3. Intra molecular forces
  4. Strong forces

Answer: B

PMC Practice Test The small orderly arranged crystalline parts of amorphous solids are called

  1. Isotrope
  2. Crystals
  3. Crystallite
  4. Bakelite

Answer: C

PMC Practice Test If pressure and volume of a gas are variable while temperature remains constant, this belongs to

  1. Charles's law
  2. Boyle's law
  3. Avogadro's law
  4. Pascal's law

Answer: B

PMC Practice Test If the absolute temperature of a gas is halved at constant pressure, its volume will:

  1. Increase 4 times
  2. Decrease 4 times
  3. Decrease 2 times
  4. Increase 2 times

Answer: C

PMC Practice Test Which will evaporate faster: hot water in a cup or cold water in a cup?

  1. Cold water
  2. Hot water
  3. Both evaporate at the same rate
  4. Both evaporate slowly

Answer: B

PMC Practice Test Solid carbon dioxide is an example of a/an:

  1. Ionic solid
  2. Metallic solid
  3. Molecular solid
  4. Covalent solid

Answer: C

PMC Practice Test If two axes of a unit cell are equal and the third is shorter or longer, with all angles 90°, the crystal system is:

  1. Cubic system
  2. Tetragonal system
  3. Triclinic system
  4. Hexagonal system

Answer: B

PMC Practice Test Evaporation is the reverse of:

  1. Sublimation
  2. Freezing
  3. Melting
  4. Condensation

Answer: D

PMC Practice Test In a pressure cooker, the boiling point of water is:

  1. Raised than the normal
  2. Lower than the normal
  3. Lower than the freezing point
  4. All of these

Answer: A

PMC Practice Test Which of the following is NOT a molecular solid?

  1. Sugar
  2. Ice
  3. Boron nitride
  4. Solid iodine

Answer: C

PMC Practice Test Vapor pressure is measured by calculating difference in liquid pressure and

  1. Mercury pressure
  2. Glass pressure
  3. Atmospheric pressure
  4. Contsiner pressure

Answer: C

PMC Practice Test An ideal gas has a volume of 20 ml, a temperature of 10 °C and a pressure of 100 kPa. The volume of the gas is reduced to 10 ml and the temperature is raised to 20 °C. What is the new pressure of the gas?

  1. 370 kPa
  2. 207 kPa
  3. 400 kPa
  4. 27 kPa

Answer: B

PMC Practice Test The constant motion of liquid molecules causes:

  1. Diffusion
  2. Evaporation
  3. Melting
  4. Both A and B

Answer: D

PMC Practice Test Which of the following has the highest boiling point?

  1. NH₃
  2. H₂O
  3. HF
  4. CH₄

Answer: B

PMC Practice Test The melting points of non-polar molecular solids are:

  1. High
  2. Low
  3. Sharp
  4. None of these

Answer: B

PMC Practice Test Ether has a lower boiling point than water because:

  1. Ether has strong intermolecular forces
  2. Water has weak H-bonding
  3. Ether has weak intermolecular forces
  4. Water has lower vapour pressure

Answer: C

PMC Practice Test When a liquid is heated, it:

  1. Contract
  2. Decompose
  3. Expand
  4. Become Non volatile

Answer: C

PMC Practice Test The partial pressure exerted by water vapour is called:

  1. Tension
  2. Aqueous tension
  3. Aqueous pressure
  4. All of these

Answer: B

PMC Practice Test London dispersion forces are the only intermolecular forces in:

  1. Ammonia
  2. Water
  3. Kerosene oil
  4. HCl

Answer: C

PMC Practice Test Cubic close packing and hexagonal close packing have identical arrangements in the:

  1. First three
  2. First two
  3. Only one
  4. First four

Answer: B

PMC Practice Test In an NaCl crystal, a chloride ion at a face centre is shared between:

  1. One Unit Cell
  2. 8 Unit cells
  3. 4 Unit cells
  4. 2 Unit cells

Answer: D

PMC Practice Test The value of Boltzmann's constant k(B) is:

  1. 8.314 J mol⁻¹ K⁻¹
  2. 1.38 × 10⁻²³ J/K
  3. 6.67 × 10⁻¹¹ N m²/kg²
  4. 1.6 × 10⁻¹⁹ C

Answer: B

PMC Practice Test The gas laws describe the ___ behaviour of gases.

  1. Abrupt
  2. Non-uniform
  3. Uniform
  4. Disordered

Answer: C

PMC Practice Test A cleavage plane appears when a crystal is:

  1. Melted
  2. Broken
  3. Heated
  4. Cooled

Answer: B

PMC Practice Test Which force in water protects aquatic life in cold climates (by making ice float)?

  1. Dipole dipole forces
  2. Debye forces
  3. H-bonding
  4. London dispersion forces

Answer: C

PMC Practice Test The shape in which a crystal usually grows is called its:

  1. Size
  2. Capacity
  3. Habit
  4. Property

Answer: C

PMC Practice Test The boiling point of a liquid does NOT depend on:

  1. External pressure
  2. Vapour pressure
  3. Amount of liquid
  4. Intermolecular forces

Answer: C

PMC Practice Test An instantaneous dipole is produced when:

  1. Two polar molecules comes closer
  2. Two non polar molecules comes closer
  3. Polar and nonpolar molecule comes closer
  4. All of these

Answer: B

PMC Practice Test The unit for pressure used in engineering work is

  1. Torr
  2. Atm
  3. Pounds per square inch
  4. Nm-2

Answer: C

PMC Practice Test A liquid crystalline state exist between two temperatures I-e melting temperature and temperature

  1. Boiling
  2. Freezing
  3. Clearing
  4. All of these

Answer: C

PMC Practice Test Plasma ‘the fourth state of matter was identified by

  1. Berzelius
  2. William Crooks
  3. Dalton
  4. Rutherford

Answer: B

PMC Practice Test Ice is an example of

  1. Polar Molecular Solid
  2. Non-Polar Molecular Solid
  3. Ionic Solid
  4. Covalent Solid

Answer: A

PMC Practice Test The unit of the van der Waals constant 'b' is:

  1. Mol dm⁻³
  2. Dm³
  3. M³ mol⁻¹
  4. M³ mol

Answer: C

PMC Practice Test Which of the following are weakest intermolecular forces?

  1. Dipole dipole forces
  2. Debye forces
  3. London dispersion forces
  4. H-bonding

Answer: C

PMC Practice Test The amount of heat required to vaporize ONE mole of liquid at its is called molar heat of vaporization

  1. Melting point
  2. Boiling point
  3. Freezing point
  4. Cooling point

Answer: B

PMC Practice Test Depending upon the nature of ordering , liquid crystals are divided into types

  1. More than 1
  2. Two
  3. Three
  4. Four

Answer: C

PMC Practice Test The Diameter of DNA is maintained due to?

  1. Dipole dipole forces
  2. Induced dipole forces
  3. Chemical bond
  4. H-bond

Answer: D

PMC Practice Test To conduct electricity through Ionic Solid, ions should be

  1. Excited
  2. Energized
  3. Free
  4. In random Motion

Answer: C

PMC Practice Test Which of the following term is constant in Boyle's law?

  1. Pressure
  2. Temperature
  3. Volume
  4. Density

Answer: B

PMC Practice Test An example of non- polar molecular crystal is

  1. Ice
  2. Iodine
  3. Sugar
  4. Salt

Answer: B

PMC Practice Test Lsomorphism is exhibited by

  1. Molecular crystals
  2. Covalent solids
  3. Ionic Crystals
  4. Metallic solids

Answer: C

PMC Practice Test What is the boiling point of Glycerine at 1 atm?

  1. 280 °C
  2. 150 °C
  3. 290 °C
  4. 110 °C

Answer: C

PMC Practice Test Independent Molecules of NaCl exist as

  1. Solid
  2. Liquid
  3. Vapours
  4. Gas

Answer: C

PMC Practice Test The spreading of a fragrance of a rose or a scent is due to the process called

  1. Effusion
  2. Diffusion
  3. Mixing
  4. None of these

Answer: B

PMC Practice Test H bonding is not present in which of the following?

  1. DNA
  2. Proteins
  3. Carbohydrates
  4. Lipids

Answer: D

PMC Practice Test Which of the following intermolecular forces are present between octane molecules?

  1. London dispersion forces
  2. Dipole dipole forces
  3. Debye forces
  4. H-Bonding

Answer: A

PMC Practice Test At higher altitudes, the boiling point of water is:

  1. Higher
  2. Lower
  3. 100 °C
  4. 0 °C

Answer: B

PMC Practice Test Plasma is difficult to maintain at

  1. Low temperature
  2. High temperature
  3. Low pressure
  4. High pressure

Answer: A

PMC Practice Test Ionic solids are brittle because, when displaced, like ions come together and:

  1. Attract each other
  2. Compress
  3. Repel
  4. Overlap each other

Answer: C

PMC Practice Test When P and T are kept constant, V = (R/P)·nT. This is:

  1. Boyle's law
  2. Charles's law
  3. Avogadro's law
  4. Pascal's law

Answer: C

PMC Practice Test Covalent crystals with giant molecules, insoluble in all solvents, include:

  1. Silicon carbide
  2. Diamond
  3. Both A and B
  4. None of these

Answer: C

PMC Practice Test The value of the universal gas constant R is:

  1. 8.314 J mol⁻¹ K⁻¹
  2. 1.38 × 10⁻²³ J/K
  3. 6.67 × 10⁻¹¹ N m²/kg²
  4. 1.6 × 10⁻¹⁹ C

Answer: A

PMC Practice Test Crystalline Solids can be converted into amorphous solids by

  1. Sublimation
  2. Evaporation
  3. Abrupt cooling
  4. Hammering

Answer: C

PMC Practice Test The molecules of solids possess ___ kinetic energy.

  1. Translational
  2. Vibrational
  3. BothA&B
  4. None of these

Answer: B

PMC Practice Test The temperature at which one crystalline form changes to other is called temperature

  1. Critical
  2. Absolute
  3. Transition
  4. None of these

Answer: C

PMC Practice Test Structure of ice is similar to which of the following?

  1. Liquid water
  2. Diamond
  3. Graphite
  4. Sucrose

Answer: B

PMC Practice Test Liquid crystal is discovered by

  1. Friedrich Reinitzer
  2. William crooks
  3. Bravis
  4. J J Thomson

Answer: A

PMC Practice Test In which crystal system are all three axes unequal and none of the angles 90°?

  1. Cubic system
  2. Triclinic system
  3. Tetragonal system
  4. Monoclinic system

Answer: B

PMC Practice Test ___ are estimated to constitute more than 99% of the visible universe.

  1. Solids
  2. Liquids
  3. Gases
  4. Plasmas

Answer: D

PMC Practice Test Arrangement of atoms in Molecular Solids can be studied with the help of

  1. Gamma Rays
  2. X Rays
  3. Spectrometry
  4. Electron Microscope

Answer: B

PMC Practice Test In hydrogen bonding, the O atom of a water molecule bonds with an H atom of another molecule by sharing its:

  1. Ionic bond, one electron
  2. Coordinate covalent bond, one lone pair
  3. Covalent bond, two lone pairs
  4. All of these

Answer: B

PMC Practice Test In which of the following dipoles are not present?

  1. Water
  2. Hcl
  3. Noble gases
  4. Chloroform

Answer: C

PMC Practice Test Which forces are very significant in non-polar molecules like Cl2,H2 and noble gases

  1. Dipole-dipole
  2. Induced dipole
  3. London
  4. Spontaneous induced dipole

Answer: C

PMC Practice Test It is the fact that 22.414 dm3 of any gas has a different masses but the same number of

  1. Atoms
  2. Particles
  3. Molecules
  4. None of these

Answer: C

PMC Practice Test The shape of KNO3 above 128 °C is

  1. Cubic
  2. Orthorhombic
  3. Rhombohedral
  4. Tetragonal

Answer: C

PMC Practice Test The molecules of CO2 in dry ice form

  1. Covalent crystals
  2. Ionic crystals
  3. Metallic crystals
  4. Molecular crystals

Answer: D

PMC Practice Test When an ideal gas of constant mass is heated in a container of fixed volume. What is the reason for the increase in pressure of the gas?

  1. Number of molecules per unit volume increases
  2. Molecules occupy greater volume of the container
  3. Average force per impact at the container wall increases
  4. Molecules collide with each other with greater force

Answer: C

PMC Practice Test In Charles's Law, volume of gas is directly related to which factor?

  1. Pressure
  2. Temperature
  3. Volume
  4. Number of moles

Answer: B

PMC Practice Test Metals are malleable and ductile because, on applying pressure, their layers:

  1. Remain fixed
  2. Slip past each other
  3. Rotate
  4. Twist

Answer: B

PMC Practice Test Amorphous solids turns into glass like state from rubber like state, this is called

  1. Transition
  2. Crack transition
  3. Glass transition
  4. All of these

Answer: C

PMC Practice Test Hydrogen bonding is stronger than:

  1. Dipole–dipole forces
  2. Debye forces
  3. London forces
  4. All of these

Answer: D

PMC Practice Test At 0°C what is the physical state of water?

  1. Ice
  2. Liquid
  3. Vapour
  4. Both ice and liquid

Answer: D

PMC Practice Test The nature of the binding force in ionic crystals is:

  1. Magnetic
  2. Repulsive
  3. Electrostatic
  4. Weak

Answer: C

PMC Practice Test The existence of an element in more than one crystalline forms called

  1. Isomerism
  2. Allotropy
  3. Anisotropy
  4. All of these

Answer: B

PMC Practice Test The unit ___ is commonly used by meteorologists.

  1. Bar
  2. Centibar
  3. Millibar
  4. Kilobar

Answer: C

PMC Practice Test Atoms in solids are

  1. Loosely Packed
  2. In random motion
  3. Excited
  4. Closely packed

Answer: D

PMC Practice Test In a cubic close-packed structure, the number of octahedral voids per atom is:

  1. 1
  2. 3
  3. 8
  4. 5

Answer: A

PMC Practice Test The amount of heat required to form vapors of one mole of a liquid at its boiling point is called as?

  1. Molar heat of fusion
  2. Molar heat of vapourization
  3. Molar heat of sublimation
  4. Molar heat of Evaporation

Answer: B

PMC Practice Test Molecular Solids are held together by weak intermolecular forces called

  1. Van der Waal forces
  2. Dipole Dipole Interaction
  3. Both A and B
  4. Electrostatic Forces

Answer: C

PMC Practice Test In non-polar molecules, the strength of London forces depends on the number of:

  1. Moles
  2. Molecules
  3. Atoms
  4. All of these

Answer: C

PMC Practice Test If the numbers of molecules of different gases are the same at S.T.P., the volumes they occupy will be:

  1. Greater
  2. Same
  3. Smaller
  4. Twice

Answer: B

PMC Practice Test The percentage of free space in a body-centred cubic unit cell is:

  1. 32%
  2. 34%
  3. 28%
  4. 3%

Answer: A

PMC Practice Test Which forces make the liquefaction of helium possible?

  1. London Dispersion forces
  2. Debye forces
  3. Dipole-dipole force
  4. H-bonding

Answer: A

PMC Practice Test At about what temperature does water boil at Murree Hills?

  1. 50 °C
  2. 100 °C
  3. 98 °C
  4. 67 °C

Answer: C

PMC Practice Test Melting point of crystalline solids are

  1. Fixed
  2. Variable
  3. Have a range of value
  4. None of these

Answer: A

PMC Practice Test If a gas is warmed by 1 °C at constant pressure, it ___ by 1/273 of its volume at 0 °C.

  1. Contracts
  2. Expands
  3. Shrink
  4. Squeezed

Answer: B

PMC Practice Test Definite Shape of NaCl crystal is its

  1. Characteristic
  2. Symmetry
  3. Habit
  4. All of these

Answer: C

PMC Practice Test Which one the characteristic of Ionic solids?

  1. High vapor pressure
  2. Good conductivity
  3. Low melting point
  4. Solubility in polar solvents

Answer: D

PMC Practice Test The sum of mole fraction of the gases in a mixture of gases is

  1. Always greater than 1
  2. Always smaller than 1
  3. May be equal or less than 1
  4. Always 1

Answer: D

PMC Practice Test The properties of gases, liquids and solids can be understand by

  1. Atomic theory
  2. Potential molecular theory
  3. Kinetic molecular theory
  4. None of these

Answer: C

PMC Practice Test The three-dimensional array in which ions are arranged in an ionic solid is called a:

  1. Unit cell
  2. Lattice
  3. System
  4. All of these

Answer: B

PMC Practice Test The adhesive nature of honey and glue is due to:

  1. H-bonding
  2. Dipole dipole forces
  3. Ionic forces
  4. Debye force

Answer: A

PMC Practice Test A real gas obeying the van der Waals equation behaves like an ideal gas if Both A and B are:

  1. Small
  2. Large
  3. Equal
  4. None of these

Answer: A

PMC Practice Test The densities of liquids are ___ than those of gases but ___ to those of solids.

  1. Lesser, closer
  2. Greater, closer
  3. Smaller, greater
  4. Lesser, greater

Answer: B

PMC Practice Test Atoms arranged in regular and repeating manner is the characteristic of

  1. Ionic solids
  2. Molecular solids
  3. Crystalline solids
  4. Covalent solids

Answer: C

PMC Practice Test Solidified noble gases contain:

  1. Polar molecules
  2. Polar atoms
  3. Non Polar atoms
  4. None of these

Answer: C

PMC Practice Test The deliquescence is a property in which a solid

  1. Absorbs moisture and remains solid
  2. Absorbs moisture and turns to liquid form
  3. Loses water of crystallization
  4. Increases the number of water of crystallization

Answer: B

PMC Practice Test Very strong attractive forces due to close packing exist in:

  1. Solids
  2. Liquids
  3. Gases
  4. All of these

Answer: A

PMC Practice Test What are the basic particles of ice crystals?

  1. Atoms
  2. Anions
  3. Cations
  4. Molecules

Answer: D

PMC Practice Test The density of an ideal gas falls as its temperature___and pressure

  1. Decrease, increase
  2. Increase, decrease
  3. Falls. Constant
  4. Constant ,constant

Answer: B

PMC Practice Test Grey tin and white tin co-exist (transition temperature) at:

  1. 128 °C
  2. 13.2 °C
  3. 32–38 °C
  4. 95.5 °C

Answer: B

PMC Practice Test The properties of liquid crystals are intermediate between those of crystals and:

  1. Anisotropic liquids
  2. Nematic liquids
  3. Isotropic liquids
  4. Liquids

Answer: C

PMC Practice Test Which of the following is NOT an ionic solid?

  1. NaCl
  2. KBr
  3. MgCl₂
  4. CO

Answer: D

PMC Practice Test The most prominent forces in a mixture of non-polar molecules are:

  1. Dipole dipole forces
  2. Debye forces
  3. H-bonding
  4. London dispersion forces

Answer: D

PMC Practice Test In the ideal gas equation PV = NkT, N represents the:

  1. Number of molecules of gas
  2. Number of moles of the gas
  3. Number of nucleons
  4. Number of protons

Answer: A

PMC Practice Test The rate of diffusion of liquids is ___ than that of gases.

  1. Lower
  2. Higher
  3. Equal to
  4. All of these

Answer: A

PMC Practice Test In Boyle's law, pressure and volume are:

  1. Directly proportional
  2. Inversely proportional
  3. Constant
  4. None of these

Answer: B

PMC Practice Test The study of crystalline solids (unit cell dimensions) can be used to determine:

  1. Mole
  2. Avogadro's number
  3. Atomic mass
  4. Atomic number

Answer: B

PMC Practice Test Which is a good conductor of electricity?

  1. Ionic solids
  2. Molecular solids
  3. Network covalent solids
  4. Metallic solids

Answer: D

PMC Practice Test A gas at pressure P₀ and volume V₀ is compressed isothermally to pressure 3P₀. Its volume becomes:

  1. 3V₀
  2. 2V₀
  3. V₀/3
  4. V₀/2

Answer: C

PMC Practice Test On Earth, plasma occurs in a few places such as:

  1. Auroras
  2. Flames
  3. Lightning bolts
  4. All of these

Answer: D

PMC Practice Test Glass is an example of a:

  1. Ionic solid
  2. Covalent solid
  3. Pseudo solid
  4. Semisolid

Answer: C

PMC Practice Test Hydrogen bonding is involved in:

  1. Cleansing action of soap
  2. Biological molecule
  3. Solubility
  4. All of these

Answer: D

PMC Practice Test Acrystal is made up of

  1. Atoms
  2. Ions
  3. Molecules
  4. All of these

Answer: D

PMC Practice Test Which of these is amorphous?

  1. Wax
  2. Plastic
  3. Glass
  4. All of these

Answer: D

PMC Practice Test Gases are ideal at high ___ and become non-ideal at high ___.

  1. Pressure, volume
  2. Pressure, temperature
  3. Temperature, pressure
  4. Volume, pressure

Answer: C

PMC Practice Test The rate of diffusion of a gas of molar mass 32 compared with H₂ is:

  1. 6 times
  2. 4 times
  3. One fourth
  4. One eighth

Answer: C

PMC Practice Test Effusion is the movement of a gas through an extremely small opening into a region of ___ pressure.

  1. High
  2. Low
  3. Moderate
  4. Same

Answer: B

PMC Practice Test Which property does NOT belong to gases?

  1. Indefinite volume
  2. Indefinite shape
  3. Low density
  4. Strong interactions

Answer: D

PMC Practice Test CuSO₄·5H₂O is an example of which crystal system?

  1. Triclinic
  2. Tetragonal
  3. Cubic
  4. Rhombohedral

Answer: A

PMC Practice Test A change in pressure significantly affects only substances in the:

  1. Liquid state
  2. Solid State
  3. Plasma state
  4. Gaseous State

Answer: D

PMC Practice Test At the top of Mount Everest, the boiling point of water is about:

  1. 100 °C
  2. 69 °C
  3. 98 °C
  4. 102 °C

Answer: B

PMC Practice Test Intermolecular forces are weakest in:

  1. Solids
  2. Liquids
  3. Gases
  4. All of these

Answer: C

PMC Practice Test The molar volume of CO₂ is maximum at:

  1. 273 °C and 2 atm
  2. 0 °C and 1 atm
  3. STP
  4. 127 °C and 1 atm

Answer: D

PMC Practice Test Crystals are obtained from a saturated solution by:

  1. Sedimentation
  2. Drying
  3. Heating
  4. Cooling

Answer: D

PMC Practice Test The kinetic energy of liquid molecules is directly proportional to the:

  1. Pressure
  2. Temperature
  3. Mass
  4. Nature

Answer: B

PMC Practice Test Which instrument is used to measure the vapour pressure of a liquid?

  1. Barometer
  2. Manometer
  3. Thermometer
  4. Sphygmometer

Answer: B

PMC Practice Test Liquids can be converted into solids by decreasing their:

  1. Potential energy
  2. Kinetic energy
  3. BothA&B
  4. None of these

Answer: B

PMC Practice Test Avogadro's hypothesis strictly applies only to:

  1. All gases
  2. Inert gases
  3. Ideal gases
  4. Light gases

Answer: C

PMC Practice Test Which gas has the smallest van der Waals constant (a)?

  1. H₂
  2. N₂
  3. CO₂
  4. Cl₂

Answer: A

PMC Practice Test When a crystal is powdered, the angles between its faces:

  1. Ruptured
  2. Changed
  3. Unchanged
  4. None of these

Answer: C

PMC Practice Test The Joule–Thomson effect is used to ___ the temperature of a gas to liquefy it.

  1. Raise
  2. Higher
  3. Equalize
  4. Lower

Answer: D

At constant temperature, the volume of a fixed mass of gas is inversely proportional to its:

  1. Pressure
  2. Number of moles
  3. Temperature
  4. Density

Answer: A

This is Boyle's law: PV = constant.

In Charles's law (V ∝ T at constant pressure), temperature must be measured in:

  1. °C
  2. °F
  3. Any unit
  4. Kelvin

Answer: D

Gas laws use absolute (Kelvin) temperature.

The value of the gas constant R in J K⁻¹ mol⁻¹ is about:

  1. 0.0821
  2. 8.314
  3. 1.987
  4. 62.4

Answer: B

R = 8.314 J K⁻¹ mol⁻¹ (0.0821 is the value in dm³ atm K⁻¹ mol⁻¹).

Real gases deviate most from ideal behaviour at:

  1. Low temperature and high pressure
  2. Low pressure only
  3. High temperature and low pressure
  4. High temperature and high pressure

Answer: A

At low temperature and high pressure, intermolecular forces and molecular volume become significant.

According to Graham's law, the rate of diffusion of a gas is inversely proportional to the square root of its:

  1. Pressure
  2. Temperature
  3. Volume
  4. Molar mass (density)

Answer: D

Lighter gases diffuse faster: rate ∝ 1/√M.

Which gas diffuses fastest?

  1. O2
  2. H2
  3. N2
  4. CO2

Answer: B

Hydrogen has the lowest molar mass, so it diffuses fastest.

Absolute zero is:

  1. −273.15 °C
  2. 273 °C
  3. −100 °C
  4. 0 °C

Answer: A

0 K = −273.15 °C.

A liquid boils when its vapour pressure becomes equal to:

  1. Zero
  2. Its critical pressure
  3. The external (atmospheric) pressure
  4. 1 kPa always

Answer: C

That is why water boils below 100 °C at high altitude.

The unusually high boiling point of water compared with H2S is due to:

  1. Ionic bonding
  2. Only van der Waals forces
  3. Hydrogen bonding
  4. Metallic bonding

Answer: C

Water molecules form strong hydrogen bonds; H2S cannot.

In a sodium chloride crystal, the coordination number of each ion is:

  1. 4
  2. 6
  3. 8
  4. 12

Answer: B

Each Na+ is surrounded by six Cl− ions and vice versa.

Contact Form