Practise 334 real Chemistry MCQs from KPK MDCAT past papers (2012–2025), set by KMU and ETEA. The questions are grouped into 16 topics that follow the current PMDC syllabus, and every question carries a tag showing the paper and year it was asked in.
Papers included: ETEA 2012, ETEA 2013, ETEA 2014, ETEA 2015, ETEA 2017, KMU 2024, KMU 2025. Choose a topic to practise with instant feedback, or take a timed test and review your answers at the end. Your progress is saved on this device. Questions that depended on diagrams or unreadable formulas have been left out.
For the other subjects, go back to all KPK MDCAT past papers 2012–2025.
Chemistry: Fundamental concepts
KMU 2025 If 4 g of H2 reacts with 2 moles of O2 to form water, which one is the excess reagent?
- H2 only
- O2 only
- H2O only
- Both O2 and H2
Answer: B
KMU 2025 For the reaction 2Na + Cl2 → 2NaCl, if 4 moles of Na and 2 moles of Cl2 are reacted, how much Cl2 will remain unreacted?
- 0 mol
- 0.5 mol
- 1 mol
- 1.5 mol
Answer: A
KMU 2024 How many moles are there in 60 g of sodium hydroxide (NaOH)?
- 2
- 4
- 6
- 8
Answer: A
KMU 2024 The efficiency of a chemical reaction can be checked by calculating the:
- Actual yield
- Theoretical yield
- Percentage yield
- Amount of the reactant unused
Answer: C
KMU 2024 The actual yield will reach the ideal (theoretical) value if the % yield of the reaction is:
- 10%
- 50%
- 90%
- 100%
Answer: D
KMU 2024 How many grams of CO2 can be produced by thermally decomposing 10 moles of ZnCO3(s)?
- 320
- 360
- 400
- 440
Answer: D
KMU 2024 How many moles of NaCl are produced from 16.5 g of HCl according to the neutralization reaction HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)?
- 0.252
- 0.452
- 0.652
- 0.852
Answer: B
KMU 2024 When 1 mole of ice melts at 0°C and a constant pressure of 1 atmosphere, 6025 J of heat is absorbed by the system. The molar volumes of ice and water are 0.020 and 0.018 dm³ respectively. Calculate ΔE. (1 dm³ atm = 101.33 J)
- 6010.20 J
- 6015.20 J
- 6020.20 J
- 6025.20 J
Answer: D
ETEA 2015 What is the number of hydrogen atoms in 5 moles of water?
- 3.0115 × 10²⁴
- 6.023 × 10²⁴
- 6.023 × 10²³
- 5.0 × 10²³
Answer: B
ETEA 2014 Choose the correct relation for percentage yield:
- (Actual yield / Theoretical yield) × 100
- (Theoretical yield / Actual yield) × 100
- (Actual yield / Theoretical yield) × 10⁶
- (Actual yield / Theoretical yield) × 10³
Answer: A
ETEA 2014 Choose the correct statement:
- The most direct and accurate method for determining atomic masses uses mass spectroscopy
- An indirect but accurate method for determining molecular masses uses mass spectroscopy
- Collision between electrons and atoms produces negative ions by absorption of electrons
- The first application of mass spectroscopy was to detect the various isotopes of argon
Answer: A
ETEA 2013 A sample of carbon-12 has a mass of 3.0 g. Which expression gives the number of atoms in the sample? (Nₐ is the Avogadro constant)
- 0.0030 Nₐ
- 0.25 Nₐ
- 3.0 Nₐ
- 4.0 Nₐ
Answer: B
ETEA 2012 The sum of the mole fractions of solute and solvent is always equal to:
- 0.1
- 10.0
- 1.0
- Zero
Answer: C
ETEA 2012 If 1 amu is equal to 1.661 × 10⁻²⁴ g, then 1.0 g will be equal to:
- 6.022 × 10²³ amu
- 6.022 × 10⁻²³ amu
- 6.022 × 10⁻²⁴ amu
- 6.022 × 10²⁴ amu
Answer: A
Chemistry: Atomic structure
KMU 2025 The energy of an orbital is determined by the:
- Hund’s rule
- Pauli exclusion principle
- (n + l) rule
- Boyle’s principle
Answer: C
KMU 2025 According to Planck’s quantum theory, if the frequency of a photon is doubled, the value of “h” will be:
- Doubled
- Increased 3 times
- Increased 4 times
- Unchanged
Answer: D
KMU 2025 The number of spectral series in the hydrogen spectrum is:
- 2
- 3
- 5
- 7
Answer: C
KMU 2025 The most electronegative element in the periodic table is:
- F
- Cl
- O
- N
Answer: A
KMU 2025 The electronic configuration of Fe³⁺ (Z = 26) is:
- [Ar] 4s² 3d³
- [Ar] 4s¹ 3d⁴
- [Ar] 4s⁰ 3d⁵
- [Ar] 4s⁰ 3d⁶
Answer: C
KMU 2024 Which of the following sub-shells does not exist?
- 1p
- 1s
- 5d
- 6f
Answer: A
KMU 2024 The splitting of spectral lines in a magnetic field is the:
- Aufbau principle
- Pauli exclusion principle
- Stark effect
- Zeeman effect
Answer: D
KMU 2024 Which element has the noble-gas electronic configuration [Kr] 5s² 4d²?
- Mo
- Se
- Sr
- Zr
Answer: D
KMU 2024 The total number of electron pairs present in the valence shell of the central atom in water is:
- 2
- 3
- 4
- 5
Answer: C
KMU 2024 The unhybridized p orbital in sp² hybridization is:
- In the same plane
- Out of the plane
- Parallel to the sp² orbitals
- Perpendicular to the sp² orbitals
Answer: D
KMU 2024 The electronegativity of Al is approximately equal to that of:
- B
- Be
- Mg
- Na
Answer: B
KMU 2024 Cu²⁺ salt solution is blue in colour due to the transition of electrons from:
- d to d orbital
- p to d orbital
- p to p orbital
- s to p orbital
Answer: A
ETEA 2017 Choose the molecule that cannot be represented by a single electronic structural formula:
- CH4
- H2O
- SO2
- O2
Answer: C
ETEA 2015 Select the molecule that has unpaired electrons in antibonding molecular orbitals:
- N₂
- Cl₂
- H₂
- O₂
Answer: D
ETEA 2015 Two atoms X and Y have the electronic configurations X: 1s² 2s² 2p⁶ 3s¹ and Y: 1s² 2s² 2p⁵. Which compound are they likely to form?
- XY
- XY₂
- X₂Y
- XY₃
Answer: A
ETEA 2015 In the main postulates of Bohr’s atomic theory, the angular momentum of the electron in the hydrogen atom is given by:
- mv = λ/2π
- r = Ze²/4πε₀mv
- mvr = nh/2π
- hνc
Answer: C
ETEA 2015 Which region of the electromagnetic spectrum is involved in nuclear magnetic resonance (NMR) spectroscopy?
- Microwave
- Radio waves
- Infrared region
- X-rays
Answer: B
ETEA 2015 The stable electronic configuration of Cu (Z = 29) is:
- [Ar] 4s² 3d⁹
- [Ar] 4s⁰ 3d¹⁰
- [Ar] 4s¹ 3d¹⁰
- [Ar] 4s² 3d⁷ 4p²
Answer: C
ETEA 2015 The proton acceptor (Brønsted base) is:
- NH₃
- BF₃
- HCl
- H⁺
Answer: A
ETEA 2014 Which is incorrect about ionization energy?
- It depends upon the magnitude of nuclear charge
- It depends upon the atomic radius
- It depends upon the shielding effect
- It does not depend upon the penetration effect of the inner orbitals
Answer: D
ETEA 2014 Select the incorrect statement:
- A molecule may gain an electron to form a molecular anion
- A molecule may lose an electron to form a molecular cation
- Molecular cations are less abundant than molecular anions
- Molecular ions can be formed by passing a high-energy electron beam through a gas
Answer: C
ETEA 2014 According to the Lewis concept, an acid is a substance which accepts:
- An electron pair
- A proton
- An electron
- A pair of protons
Answer: A
ETEA 2014 Carbon-14 is used in carbon dating. Which of the following species has the same number of neutrons and the same number of electrons as an atom of C-14?
- ¹⁴₇N⁺
- ¹⁶₈O²⁺
- ¹⁷₉F³⁺
- ¹⁸₁₄Si
Answer: B
ETEA 2013 Which of the following structures has a bond formed by the overlap of an sp² hybrid orbital with an sp hybrid orbital?
- HC≡CH
- H₂C=CH₂
- H₂C=C=CH₂
- CH₂=CHCH₃
Answer: C
ETEA 2013 The differences in energy between different states of bond vibration in a molecule correspond to which region of the electromagnetic spectrum?
- Microwave
- Infrared
- Visible
- X-rays
Answer: B
ETEA 2013 Which electronic sub-shell do the lanthanides have incompletely filled?
- 3f
- 4f
- 5f
- 6f
Answer: B
ETEA 2013 How many different values can m assume in the electron sub-shell designated by quantum numbers n = 5, l = 4?
- 4
- 5
- 6
- 9
Answer: D
ETEA 2013 A neutral atom A has the electronic configuration 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹. It will most probably form an ion of valence:
- −2
- −1
- +2
- +1
Answer: D
ETEA 2013 According to molecular orbital theory, which one of the following has two unpaired electrons?
- N₂
- O₂
- F₂
- He₂²⁺
Answer: B
ETEA 2012 The correct electronic configuration of nickel (Z = 28) is:
- 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁸ 4s²
- 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁷ 4s² 4p¹
- 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s² 4p²
- 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s¹ 4p³
Answer: A
ETEA 2012 Which of the following electronic configurations belongs to the element with the highest ionization potential?
- 1s² 2s² 2p³
- 1s² 2s² 2p⁴
- 1s² 2s² 2p⁶ 3s¹
- 1s² 2s² 2p⁶ 3s² 3p³
Answer: A
Chemistry: Gases, liquids and solids
KMU 2025 The force of attraction due to temporary dipoles is called:
- Dipole–dipole force
- Dispersion force
- Debye force
- Ion–dipole force
Answer: B
KMU 2025 Real gases do not reach absolute zero in practice because:
- Molecular collisions become inelastic due to increased kinetic energy
- Intermolecular forces become negligible and molecules disperse
- Kinetic energy of molecules increases due to compression
- Intermolecular forces exceed the kinetic energy of the molecules (they liquefy first)
Answer: D
KMU 2025 Water changes from a liquid at 4°C to ice at 0°C. What is the change in volume?
- 9% increase
- 9% decrease
- 19% increase
- 19% decrease
Answer: A
KMU 2025 The value of R in atm dm³ mol⁻¹ K⁻¹ is:
- 0.0821
- 0.821
- 62.4
- 8.314
Answer: A
KMU 2025 Which of the following is NOT a postulate of the kinetic molecular theory of gases?
- Gas molecules undergo elastic collisions
- Gas molecules are in continuous random motion
- Gas molecules do not exert pressure when they collide with the walls of the container
- Gas molecules are far away from each other
Answer: C
KMU 2025 The compound that reacts with phenylhydrazine to form a crystalline phenylhydrazone derivative is:
- Butanal
- 1,3-Butadiene
- Ethyl acetate
- Ethanol
Answer: A
KMU 2025 If the pressure and temperature (in kelvin) of a gas are both doubled, the new volume will be:
- Doubled
- Halved
- Tripled
- The same
Answer: D
KMU 2024 Which one of the following molecules has a zero dipole moment?
- BF3
- NF3
- NH3
- H2O
Answer: A
KMU 2024 760 torr is equal to ___ pascal.
- 1
- 76
- 760
- 101325
Answer: D
KMU 2024 An example of a metallic solid is:
- B
- C
- Cu
- Si
Answer: C
KMU 2024 When a crystalline substance conducts current in one direction but not in other directions of the crystal, this property is:
- Allotropy
- Anisotropy
- Isomorphism
- Polymorphism
Answer: B
KMU 2024 Calculate the work done when 1 mole of an ideal gas expands from 15 dm³ to 20 dm³ against a constant external pressure of 2 atmospheres.
- −10 atm dm³
- −5 atm dm³
- 5 atm dm³
- 10 atm dm³
Answer: A
ETEA 2017 When chlorine gas is passed over heated powdered silicon, a colourless liquid is produced. Its formula is:
- SiCl2
- SiCl4
- Si2Cl3
- SiCl
Answer: B
ETEA 2017 Choose the property that shows anisotropic behaviour:
- Coefficient of thermal expansion
- Lattice energy
- Viscosity
- Infrared spectroscopy
Answer: A
ETEA 2017 A container holds a mixture of gases: 20% ammonia, 30% hydrogen and 50% oxygen under 50 atm pressure. The partial pressures, respectively, are:
- 10 atm, 25 atm, 15 atm
- 10 atm, 15 atm, 25 atm
- 25 atm, 10 atm, 15 atm
- 15 atm, 25 atm, 10 atm
Answer: B
ETEA 2015 If the absolute temperature of a gas is doubled and its pressure is increased 4 times, the volume becomes:
- Half
- Double
- 4 times
- Unchanged
Answer: A
ETEA 2014 Select the true statement about amorphous solids:
- Amorphous substances have sharp melting points
- Amorphous substances do not have fixed melting points
- Amorphous substances have proper geometrical shapes
- The particles in amorphous substances are arranged in an orderly manner
Answer: B
ETEA 2014 Both NaNO₃ and CaCO₃ crystallize in rhombohedral form; therefore they are:
- Allotropes
- Polymorphous
- Isomorphous
- None of these
Answer: C
ETEA 2014 Pure water freezes at 0 °C and boils at 100 °C at standard conditions. Calcium chloride is added to pure water. What do you expect about its freezing and boiling points?
- No change in freezing point and boiling point
- Freezing point increases and boiling point decreases
- Freezing point increases and boiling point increases
- Freezing point decreases and boiling point increases
Answer: D
ETEA 2014 “Equal volumes of different gases under the same conditions of temperature and pressure contain the same number of particles.” This statement is:
- Avogadro’s law
- Graham’s law
- Dalton’s law
- Hund’s rule
Answer: A
ETEA 2014 Which is the correct statement?
- The average kinetic energy of gas molecules depends on the volume in which the gas is enclosed
- The average kinetic energy of gas molecules is proportional to the pressure
- The average kinetic energy of gas molecules is proportional to the absolute temperature
- All of the above
Answer: C
ETEA 2014 Which statement is wrong about the fourth state of matter, known as plasma?
- Plasma contains equal amounts of positive and negative charges and is almost neutral as a whole
- Plasma exists in the atmosphere of stars
- Plasma exists in the region around the sun
- There is less matter in the plasma state than in the familiar solid, liquid and gaseous states
Answer: D
ETEA 2014 Hydrogen bonding does not exist in the molecule of:
- Hydrogen
- Proteins
- Carbohydrates
- Ammonia
Answer: A
ETEA 2014 Vapour pressure of a liquid can be measured by the barometric method and the manometric method. Which is true?
- The barometric method is more accurate than the manometric method
- The manometric method is more accurate than the barometric method
- Both are equally accurate and applicable
- Both methods are in use but are not reliable
Answer: B
ETEA 2014 The van der Waals equation of state for non-ideal gases differs from the ideal gas law in that it accounts for: (I) the mass of each molecule, (II) the volume of each molecule, (III) the attractive forces between molecules.
- I, II and III
- I and II only
- I and III only
- II and III only
Answer: D
ETEA 2014 Which is not used in calculating the lattice energy of crystalline solids?
- Haber process
- Born–Haber cycle
- Hess’s law
- Enthalpy changes
Answer: A
ETEA 2014 The sodium chloride crystal structure is:
- Hexagonal
- Body-centred cubic
- Face-centred cubic
- Tetragonal
Answer: C
ETEA 2014 Choose the compound in which (intermolecular) hydrogen bonding is not possible:
- H₂O
- HCl
- CH₃COOH
- CH₃OCH₃
Answer: D
ETEA 2013 How many molecules are present in 0.20 g of hydrogen gas?
- (0.20/1.008) × 6.02 × 10²³
- 0.20 × 2.016
- (0.20/2.016) × 6.02 × 10²³
- (1.008/0.20) × 6.02 × 10²³
Answer: C
ETEA 2013 Which one of the following compounds participates in hydrogen bonding?
- CH₃Cl
- CH₃OCH₃
- CH₃NH₂
- C₆H₅OCH₃
Answer: C
ETEA 2013 Ozone gas is:
- Greenish, tasteless and light
- Greenish-blue and bitter in taste
- Blue, poisonous and explosive
- Purple-yellow, non-poisonous and non-explosive
Answer: C
ETEA 2012 An azeotropic mixture of two miscible liquids boils at a lower temperature than its components when:
- The system shows negative deviation from Raoult’s law
- The system shows positive deviation from Raoult’s law
- The system perfectly obeys Raoult’s law
- Both A and B
Answer: B
ETEA 2012 Choose the compound in which hydrogen bonding is not possible:
- CH₃OCH₃
- H₂O
- CH₃CH₂OH
- CH₃COOH
Answer: A
ETEA 2012 Ozone is a:
- Greenish, tasteless, light gas
- Blue-green gas, bitter in taste
- Blue, poisonous and explosive gas
- Purple-yellow, poisonous and non-explosive gas
Answer: C
ETEA 2012 CH₄ on controlled oxidation in the presence of Cu as catalyst under 200 atm yields:
- Methanol
- Formaldehyde
- Formic acid
- Carbon dioxide gas
Answer: A
ETEA 2012 Solids in which the molecules or ions are arranged in a regular repetitive manner are called:
- Amorphous solids
- Glassy solids
- Polymers
- Crystals
Answer: D
ETEA 2012 Paper is a biodegradable material. On decomposition it produces a gas whose emission is environmentally objectionable. Which is that gas?
- CO₂
- SO₂
- CH₄
- NO₂
Answer: C
ETEA 2012 Choose the correct statement:
- Ionic solids exist in the form of molecules
- Ionic solids have high volatility
- Ionic solids exist in the form of liquids
- Ionic solids have high melting and boiling points
Answer: D
ETEA 2012 Which is true about London forces?
- London forces are present in non-polar molecules
- London forces are present in polar molecules
- London forces are created between an instantaneous dipole and an induced dipole
- All of the above
Answer: D
ETEA 2012 The standard enthalpy of the elements at 1 atm pressure and 298 K is arbitrarily given the value:
- 0.1
- 1.0
- 29.8
- Zero
Answer: D
ETEA 2012 Select the correct statement about lattice energy:
- It is the energy absorbed when 1 mole of an ionic crystal lattice is formed from its constituent ions in the gaseous state
- It is the energy liberated when 1 mole of an ionic crystal lattice is formed from its constituent ions in the gaseous state
- It is the energy liberated when 1 mole of an ionic crystal lattice is split into its constituent ions in the gaseous state
- None of the above
Answer: B
ETEA 2012 In which of the following compounds is hydrogen bonding possible?
- PH₃
- CH₄
- NH₃
- SiH₄
Answer: C
Chemistry: Chemical equilibrium
KMU 2025 In which case does a chemical reaction proceed nearly to completion?
- When Kc is small but positive
- When Kc is large but positive
- When Kc is negative
- When Kc is approximately equal to 1
Answer: B
KMU 2025 The Ksp value of the salt AB ⇌ A⁺ + B⁻ is 9 × 10⁻⁶. Its molar solubility will be:
- 3 × 10⁻⁶
- 9 × 10⁻³
- 3 × 10⁻³
- 9 × 10⁻⁶
Answer: C
KMU 2025 The rate of a (reversible) chemical reaction changes with the:
- Concentration of reactant molecules
- Concentration of product molecules
- Concentration of both reactants and products
- Rate constant
Answer: A
KMU 2025 Acetaldehyde reacts with ethanol in the presence of acid and initially produces a/an:
- Acetal
- Hemiacetal
- Diol
- Diethoxyethane
Answer: B
KMU 2025 According to Le Chatelier’s principle, when the pressure of a gaseous equilibrium system is increased, the equilibrium shifts towards:
- No change in equilibrium position
- The side with greater volume
- The side with lower volume
- The side with more moles of gas
Answer: C
KMU 2024 A forward reaction is the one that:
- Is very slow at the beginning of the reaction
- Reacts to form reactants
- Speeds up gradually and at equilibrium its rate becomes constant
- Takes place from left to right as given in the chemical equation
Answer: D
KMU 2024 The unit of Kc for the system PCl5 ⇌ PCl3 + Cl2 is:
- dm³/mol
- mol/dm³
- mol/dm⁶
- mol²/dm⁶
Answer: B
KMU 2024 Which one of the following is a strong electrolyte in solution?
- Acetic acid
- Ammonium hydroxide
- Carbonic acid
- Potassium iodide
Answer: D
KMU 2024 Acetic acid can be prepared by the hydrolysis of:
- Ethanal
- Ethanol
- Methanoic acid
- Methyl cyanide
Answer: D
ETEA 2017 What is the name of the carboxylic acid given below? HOOC(CH2)3COOH
- Propanedioic acid
- Pentane dioic acid
- Pentane dicarboxylic acid
- Propane dicarboxylic acid
Answer: B
ETEA 2017 Choose the acids that show the levelling effect (in water): i) HClO4 ii) HI iii) HCl iv) HF
- i & iv
- i, iii & iv
- iii & iv
- i, ii & iii
Answer: D
ETEA 2017 The compound which has purely acidic character is:
- Mg(OH)2
- Al(OH)3
- Si(OH)4
- None of the above
Answer: C
ETEA 2017 Ka values of some compounds are: H2O 1×10⁻¹⁴; ROH 1×10⁻¹⁸; RCOOH 1×10⁻⁵; C6H5OH 1×10⁻¹⁰. Select the correct order of acidic strength:
- ROH > H2O > C6H5OH > RCOOH
- C6H5OH > H2O > ROH > RCOOH
- RCOOH > C6H5OH > H2O > ROH
- H2O > RCOOH > ROH > C6H5OH
Answer: C
ETEA 2017 Excess Ag2CrO4 was dissolved in distilled water; its solubility was found to be 1.3 × 10⁻⁴ mol dm⁻³. The solubility product is:
- Ksp = [1.3 × 10⁻⁴]² [1.3 × 10⁻⁴]
- Ksp = [2.6 × 10⁻⁴]² [1.3 × 10⁻⁴]
- Ksp = [1.3 × 10⁻⁸] [1.3 × 10⁻⁴]
- Ksp = [1.3 × 10⁻⁸]² [1.3 × 10⁻⁴]²
Answer: B
ETEA 2017 AlBr3, used in the alkylation of benzene, possesses the properties of:
- A catalyst
- A Lewis acid
- An electron-deficient species
- All of the above
Answer: D
ETEA 2017 Many hexaaqua complex ions react with water, e.g. [Fe(H2O)6]²⁺ + H2O ⇌ [Fe(H2O)5OH]⁺ + H3O⁺. This reaction is classed as:
- Redox reaction
- Acid base reaction
- Decomposition reaction
- Substitution reaction
Answer: C
ETEA 2015 For the ionization NH₄OH(aq) ⇌ NH₄⁺(aq) + OH⁻(aq), ammonium chloride is added to the system. Select the correct statement:
- The equilibrium will shift to the right
- The equilibrium will shift to the left
- The equilibrium will remain undisturbed
- The equilibrium will be attained quickly
Answer: B
ETEA 2015 Which of the following ions can act both as a Brønsted acid and a base in water?
- CN⁻
- SO₄²⁻
- HCO₃⁻
- PO₄³⁻
Answer: C
ETEA 2015 Which is the strongest acid?
- CH₃COOH
- CH₂ClCOOH
- CHCl₂COOH
- CCl₃COOH
Answer: D
ETEA 2015 Choose the group that causes solubility of dyes in water (as in acid dyes):
- –OH
- –NH₂
- –SO₃H
- –COOH
Answer: C
ETEA 2015 Hydrolysis of an ester in the presence of KOH is called:
- Esterification
- Decarboxylation
- Saponification
- Neutralization
Answer: C
ETEA 2015 Excess ethanol is heated with concentrated sulphuric acid at 140 °C. The product formed is:
- C₂H₅OC₂H₅ + H₂O
- C₂H₄
- C₂H₅OH
- C₂H₆
Answer: A
ETEA 2015 Which one of the following acids has a strong conjugate base?
- CH₃COOH
- HCl
- HNO₃
- H₂SO₄
Answer: A
ETEA 2015 The pH of a 0.001 M aqueous solution of NaOH is:
- 6
- 13
- 11
- 12
Answer: C
ETEA 2015 The aqueous solution of which of the following pairs maintains its pH constant (acts as a buffer)?
- CH₃COOH and (NH₄)₂SO₄
- NH₄NO₃ and KNO₃
- NH₄OH and NH₄Cl
- NH₄OH and NaCl
Answer: C
ETEA 2014 Which of the following is a Lewis acid?
- CH₃OH
- AlCl₃
- NH₃
- CH₃OCH₃
Answer: B
ETEA 2014 Which of the following compounds will react with methylmagnesium iodide, followed by acid hydrolysis, to give ethyl alcohol?
- Ethylene
- Acetone
- Acetaldehyde
- Formaldehyde
Answer: D
ETEA 2014 Fatty acids are:
- Unsaturated dicarboxylic acids
- Long-chain alkanoic acids
- Aromatic carboxylic acids
- Aromatic dicarboxylic acids
Answer: B
ETEA 2014 Acetic acid reacts with methyl alcohol in the presence of an acid catalyst to give:
- Ethyl formate
- Ethyl acetate
- Methyl formate
- Methyl acetate
Answer: D
ETEA 2014 Milk of magnesia is used for the treatment of acidity in the stomach. Its formula is:
- Mg(OH)₂
- MgSO₄
- Ca(OH)₂
- CaSO₄
Answer: A
ETEA 2014 The major product of acid-catalysed dehydration of 3-pentanol is:
- 1-Pentene
- 2-Pentene
- 2-Methylbutane
- 3-Methylbutane
Answer: B
ETEA 2014 Select the strongest acid from the given pKa values:
- HI, pKa = 10
- HCN, pKa = 9.4
- H₂SO₄, pKa = 1.8
- HNO₃, pKa = 3.0
Answer: C
ETEA 2013 The smaller the value of pKb:
- The weaker the base
- The stronger the base
- The stronger the acid
- None of the above
Answer: B
ETEA 2013 Rainwater is considered acid rain when its pH becomes:
- Greater than 6
- Greater than 6.5
- Less than 5.6
- Less than 5
Answer: C
ETEA 2013 Which one of the following is the strongest acid?
- CH₃COOH
- CH₃CH₂COOH
- C₆H₅CH₂COOH
- FCH₂COOH
Answer: D
ETEA 2013 What will be the product when PCl₅ reacts with acetic acid?
- CH₃Cl
- CH₃COCl
- CH₃COCl₂
- CH₃CH₂COCl
Answer: B
ETEA 2013 Benzene reacts with acetyl chloride in the presence of a Lewis acid to form:
- Chlorobenzene
- Acetophenone
- Benzoic acid
- Benzophenone
Answer: B
ETEA 2013 Which of the following titrants would most likely be used as its own indicator in acidic medium?
- K₂Cr₂O₇
- Iodine
- KMnO₄
- H₂O₂
Answer: C
ETEA 2013 Which of the following is hypochlorous acid?
- HClO
- HClO₂
- HClO₃
- HClO₄
Answer: A
ETEA 2013 Which one of the following is a Lewis acid?
- (CH₃)₃N
- PH₃
- BF₃
- O₂
Answer: C
ETEA 2013 Which statement is correct while recharging an automobile (lead-acid) battery?
- Pb is converted to PbO₂
- PbSO₄ is converted to Pb
- Pb is converted to PbSO₄
- None of the above
Answer: B
ETEA 2013 A salt AB ionizes as AB ⇌ A⁺ + B⁻. The solubility product of AB is 4.0 × 10⁻⁴. The molar solubility of the salt is:
- 4.0 × 10⁻⁴ M
- 2.0 × 10⁻² M
- 8.0 × 10⁻⁴ M
- 2.0 × 10⁻⁴ M
Answer: B
ETEA 2012 Which is the strongest acid?
- CH₃COOH
- Cl₂CHCOOH
- ClCH₂COOH
- Cl₃CCOOH
Answer: D
ETEA 2012 Consider the endothermic reaction N₂(g) + O₂(g) ⇌ 2NO(g). What will happen to the equilibrium if the temperature of the system is raised?
- The equilibrium will shift in the backward direction
- The equilibrium position will suffer no change
- The equilibrium will shift in the forward direction
- All of the above
Answer: C
ETEA 2012 Acetic acid reacts with methanol in the presence of an acid catalyst to give:
- Methyl formate
- Ethyl formate
- Methyl acetate
- Ethyl acetate
Answer: C
ETEA 2012 Select the correct equilibrium constant expression Kc for the reaction Ce⁴⁺(aq) + Fe²⁺(aq) ⇌ Ce³⁺(aq) + Fe³⁺(aq):
- [Ce³⁺][Fe³⁺]² / [Ce⁴⁺][Fe²⁺]
- [Ce³⁺][Fe³⁺] / [Ce⁴⁺][Fe²⁺]
- [Ce³⁺]²[Fe³⁺] / [Ce⁴⁺][Fe²⁺]
- [Ce³⁺][Fe³⁺] / [Ce⁴⁺]²[Fe²⁺]
Answer: B
ETEA 2012 Which one is not responsible for the formation of acid rain?
- CO₂
- SO₂
- CO
- NO₂
Answer: C
ETEA 2012 “The rate of a reaction is proportional to the product of the active masses (concentrations) of the reactants.” This statement is the:
- Raoult’s law
- Le Chatelier’s principle
- Law of conservation of energy
- Law of mass action
Answer: D
ETEA 2012 Which one of the following will give an ionic product?
- CH₃CH₂OH + PCl₅ →
- CH₃CH₂OH + Na →
- CH₃CH₂OH + PCl₃ →
- CH₃CH₂OH + SOCl₂ →
Answer: B
ETEA 2012 Which of the following can function as a Lewis acid?
- CN⁻
- NH₃
- CH₃–O–CH₃
- I⁺
Answer: D
ETEA 2012 Which is NOT true about amino acids?
- They have two functional groups
- They show both acidic and basic characteristics
- They are the basic units of proteins
- They do not exist in the solid state
Answer: D
Chemistry: Reaction kinetics
KMU 2025 The specific rate constant (k) of a reaction is related to the concentration of reactants:
- Directly
- Inversely
- Exponentially
- Independently (not related)
Answer: D
KMU 2025 On increasing the temperature, the rate of reaction increases mainly because:
- The activation energy of the reaction increases
- The concentration of the reacting molecules increases
- The collision frequency increases
- The energy of molecules decreases
Answer: C
KMU 2024 For a first order reaction A → B, the rate constant is 0.0458 s⁻¹. Calculate the rate of reaction if the concentration of reactant is 0.35 mol dm⁻³.
- 0.012 mol dm⁻³ s⁻¹
- 0.014 mol dm⁻³ s⁻¹
- 0.016 mol dm⁻³ s⁻¹
- 0.018 mol dm⁻³ s⁻¹
Answer: C
KMU 2024 A reaction is first order with respect to A and second order with respect to B. The rate equation is:
- Rate = k[A]
- Rate = k[A][B]
- Rate = k[A]²[B]
- Rate = k[A][B]²
Answer: D
ETEA 2014 For a reaction, the rate dx/dt was plotted against (a − x)² and a straight line was obtained. It may be concluded that the reaction is:
- First order
- Second order
- Third order
- Zero order
Answer: B
ETEA 2013 Vinyl acetate monomer is prepared by the reaction of acetaldehyde and acetic anhydride. The catalyst employed is:
- FeCl₃
- Al₂O₃
- V₂O₅
- Cr₂O₃
Answer: A
ETEA 2012 For a certain reaction, the rate was plotted against the square of concentration (a − x)² and a straight line was obtained. This indicates that the reaction is of:
- First order
- Second order
- Third order
- Zero order
Answer: B
ETEA 2012 Select the chemical method used for the determination of reaction rate:
- Conductometry
- Polarimetry
- pH-metry
- Volumetric analysis
Answer: D
Chemistry: Thermochemistry
KMU 2025 For an exothermic reaction, the energy level of the reactants is:
- Less than the products
- More than the products
- Equal to the products
- Zero
Answer: B
KMU 2025 An increase in the internal energy of a chemical system can lead to all of the following EXCEPT:
- An increase in temperature due to a rise in the kinetic energy of molecules
- A phase change such as melting or evaporation
- A chemical reaction if the energy supplied is sufficient to break bonds
- An increase in temperature due to a drop in the kinetic energy of molecules
Answer: D
KMU 2025 If ΔH for a reaction is positive, then on decreasing the temperature the reaction will:
- Move forward
- Move in reverse
- Have no effect
- Move both forward and reverse
Answer: B
KMU 2025 Heat of sublimation of Na = 108 kJ/mol, ionization energy of Na = 496 kJ/mol, bond dissociation energy of Cl2 = 121 kJ/mol (per ½Cl2), electron affinity of Cl = −349 kJ/mol and enthalpy of formation of NaCl = −411 kJ/mol. Calculate the lattice energy of NaCl.
- −678 kJ/mol
- −727 kJ/mol
- −819 kJ/mol
- −832 kJ/mol
Answer: B
KMU 2024 The molar heat of vaporization of water is:
- 40.7 cal/mol
- 40.7 J/mol
- 40.7 kcal/mol
- 40.7 kJ/mol
Answer: D
KMU 2024 For N2 + 3H2(g) ⇌ 2NH3(g), ΔH = −92.46 kJ/mol, the optimum temperature (°C) to produce ammonia is:
- 0
- 450
- 5000
- Constant temperature
Answer: B
KMU 2024 ΔH can be measured indirectly by applying:
- Avogadro’s law
- Faraday’s law
- Gas laws
- Hess’s law
Answer: D
KMU 2024 The heat of sublimation of potassium is 98 kJ/mol, the heat of dissociation of bromine gas is 192.5 kJ/mol, the ionization energy of K is 414 kJ/mol, the electron affinity of Br is −334.7 kJ/mol and the heat of formation of KBr is −405.8 kJ/mol. Calculate the lattice energy of KBr.
- −679.3 kJ/mol
- −669.5 kJ/mol
- 679.3 kJ/mol
- 669.5 kJ/mol
Answer: A
ETEA 2017 The bond energy of the H2 molecule (H2 → 2H) is:
- 436 kJ/mol
- 40.7 kJ/mol
- 272 kJ/mol
- 436 ÷ Avogadro’s number kJ/mol
Answer: A
ETEA 2017 The compound with the most exothermic lattice energy is:
- CaCl2
- K2O
- CaO
- BaCl2
Answer: C
ETEA 2014 Heating the reaction CO₂(g) + 2H₂O(g) ⇌ CH₄(g) + 2O₂(g) shifts it to the right. The forward reaction can therefore be described as:
- Spontaneous
- Adiabatic
- Endothermic
- Exothermic
Answer: C
ETEA 2013 The change in enthalpy at constant pressure, ΔH, is equal to:
- ΔH = q + PΔV
- ΔH = ΔE − PΔV
- ΔH = ΔE + PΔV
- ΔH = q − PΔV
Answer: C
ETEA 2012 Which one is a spontaneous chemical reaction?
- Zn + Cu²⁺ → Zn²⁺ + Cu
- Zn²⁺ + Cu → Cu²⁺ + Zn
- 2Fe(OH)₃ → 2Fe + 3/2 O₂ + 3H₂O
- 2NaCl → 2Na + Cl₂
Answer: A
Chemistry: Electrochemistry
KMU 2025 In an electrolytic cell, when current passes through a solution, the anode is:
- A positive electrode where oxidation occurs
- A negative electrode where oxidation occurs
- A positive electrode where reduction occurs
- A negative electrode where reduction occurs
Answer: A
KMU 2025 Balance the equation using the oxidation number method: Cu + H2SO4 → CuSO4 + SO2 + H2O
- Cu + H2SO4 → CuSO4 + SO2 + H2O
- Cu + H2SO4 → CuSO4 + SO2 + H2
- Cu + 2H2SO4 → CuSO4 + SO2 + 2H2O
- 2Cu + 2H2SO4 → 2CuSO4 + SO2 + 2H2O
Answer: C
KMU 2024 The electrode potential of the standard hydrogen electrode is chosen as:
- −1 V
- 0 V
- 1 V
- 2 V
Answer: B
ETEA 2017 Kolbe’s electrolysis of sodium butyrate (CH3CH2CH2COONa) gives:
- C6H12
- C6H14
- C5H10
- C5H12
Answer: B
ETEA 2017 Which of the following atoms, in the given oxidation state, has the highest electronegativity?
- Mo(II)
- Mo(III)
- Mo(V)
- Mo(VI)
Answer: D
ETEA 2017 Choose the incorrect statement about corrosion:
- Corrosion cannot be eliminated completely
- Using modern techniques corrosion can be completely eliminated
- The corrosion process can be slowed down by certain methods
- The presence of acidic oxides in the environment speeds up corrosion
Answer: B
ETEA 2015 The reduction of aldehydes and ketones in the presence of zinc amalgam and HCl is termed:
- Grignard reduction
- Clemmensen reduction
- Wolff–Kishner reduction
- Friedel–Crafts reduction
Answer: B
ETEA 2015 The order of reducing power of the halide ions is:
- I⁻ > Br⁻ > Cl⁻ > F⁻
- F⁻ > Cl⁻ > Br⁻ > I⁻
- I⁻ > Cl⁻ > F⁻ > Br⁻
- Br⁻ > Cl⁻ > I⁻ > F⁻
Answer: A
ETEA 2015 The cathode (positive plate) in a lead storage battery is made of:
- Lead
- Lead dioxide
- Lead hydroxide
- None of the above
Answer: B
ETEA 2015 The oxidation state of carbon in Na₂C₂ is:
- +4
- +2
- −1
- −4
Answer: C
ETEA 2015 Chromium compounds in which the oxidation state is +6 behave as:
- Strong oxidizing agents
- Strong reducing agents
- Very weak oxidizing agents
- Very weak reducing agents
Answer: A
ETEA 2014 Reduction of acetaldehyde with H₂/Ni gives:
- Ethanol
- Ethanoic acid
- Ethane
- Ethylene
Answer: A
ETEA 2013 Which one of the following will not undergo dehydrogenation (oxidation to a carbonyl compound)?
- CH₃OH
- (CH₃)₂CHOH
- (CH₃)₃COH
- CH₃CH₂OH
Answer: C
ETEA 2013 On the standard reduction potential chart, a strong reducing agent has:
- Small negative values
- Large negative values
- Small positive values
- Large positive values
Answer: B
ETEA 2013 The variable oxidation states of transition elements are attributed to the involvement of s electrons as well as:
- Unpaired d electrons
- Unpaired p electrons
- Unpaired f electrons
- Paired d electrons
Answer: A
ETEA 2012 Select the strongest reducing agent:
- Cl⁻
- Ne
- Na⁺
- Ca²⁺
Answer: A
Chemistry: Chemical bonding
KMU 2025 In the ethene molecule, each carbon atom has three hybridized sp² orbitals which are:
- Coplanar
- Tetrahedral
- Linear
- Pyramidal
Answer: A
KMU 2025 In a molecule of phenol, the carbon atom attached to the –OH group is:
- sp hybridized
- sp² hybridized
- sp³ hybridized
- Unhybridized
Answer: B
KMU 2025 Which of the following has the highest bond energy?
- HCl
- HI
- HF
- HBr
Answer: C
KMU 2025 The molecular orbitals in benzene are:
- Localized
- Delocalized
- Hybridized
- Polarized
Answer: B
KMU 2024 Which one of the following molecules has a pyramidal structure?
- C2H4
- CH4
- H2O
- NH3
Answer: D
ETEA 2017 A complex with coordination number six and d²sp³ hybridization has which shape?
- Tetrahedral
- Square planar
- Trigonal bipyramidal
- Octahedral
Answer: D
ETEA 2017 Which types of hybridization are present in hex-4-en-1-yne?
- sp²
- sp
- sp and sp²
- sp, sp² and sp³
Answer: D
ETEA 2015 Choose the type of hybridization of carbon atoms in cyclopropane and the C–C–C bond angle:
- sp³, 109.5°
- sp³, 60°
- sp², 120°
- sp², 107°
Answer: B
ETEA 2015 The shape of SnCl₂ is:
- Linear
- Trigonal pyramidal
- Trigonal planar
- Angular
Answer: D
ETEA 2015 The electronic transition generally involved in the visible region (in coloured transition metal compounds) is:
- σ–σ*
- d–d
- π–π*
- π–σ*
Answer: B
ETEA 2015 The π → π* electronic transition occurs in molecules having:
- A double bond
- A triple bond
- An aromatic ring
- All of the above
Answer: D
ETEA 2015 The first ionization energy of an atom depends on the:
- Charge on the nucleus
- Screening effect
- Electronic configuration
- All of the above
Answer: D
ETEA 2014 Which one of the following is most ionic?
- NaCl
- MgCl₂
- KCl
- AlCl₃
Answer: C
ETEA 2014 Which is the incorrect statement?
- Ionic bonds are non-directional in character
- Crystals of covalent compounds are made up of molecules
- Covalent bonds are rigid and non-directional
- Ionic compounds have high melting and boiling points
Answer: C
ETEA 2013 The H–C–C bond angle in ethane is:
- 109.5°
- 120°
- 90°
- 107.5°
Answer: A
ETEA 2013 Which one of the following compounds shows covalent bonding?
- CaF₂
- MgO
- KCl
- SiH₄
Answer: D
ETEA 2013 Which one of the following has covalent bonds formed by the overlap of sp hybridized orbitals with p orbitals?
- BF₃
- H₂O
- HgCl₂
- NH₃
Answer: C
ETEA 2013 Ethylenediaminetetraacetate ion (EDTA) is a polydentate ligand. It bonds to the central metal atom through:
- Two of its atoms
- Three of its atoms
- Four of its atoms
- Six of its atoms
Answer: D
ETEA 2012 Methanoic acid HCOOH has one carbon–oxygen bond of length 123 pm and another of 136 pm. The C=O and C–O bond lengths respectively would be:
- 136 pm, 123 pm
- 123 pm and 136 pm
- 136 pm, 136 pm
- 123 pm and 123 pm
Answer: B
ETEA 2012 The σ bond formed between carbon and oxygen atoms in aldehydes and ketones is due to the overlap of:
- sp²–sp
- sp²–sp²
- sp³–sp²
- sp–sp
Answer: B
ETEA 2012 How many sigma bonds are there in CH₂=CH–CH=CH₂?
- 6
- 9
- 11
- 4
Answer: B
ETEA 2012 Which hybridization explains the shape of BeCl₂?
- sp² hybridization
- sp hybridization
- sp³ hybridization
- dsp² hybridization
Answer: B
ETEA 2012 Which is the least polar molecule?
- HF
- HI
- HCl
- HBr
Answer: B
Chemistry: s- and p-block elements
KMU 2025 Which of the following best explains the reaction between beryllium (Be) and oxygen?
- Be burns vigorously with oxygen forming a layer of BeO, which accelerates the oxidation of the remaining metal
- Be reacts with oxygen forming a layer of BeO, which protects the metal from further oxidation
- Be reacts slowly with oxygen to form a volatile oxide BeO, which evaporates quickly
- Be is the only alkaline earth metal that doesn’t react with oxygen
Answer: B
KMU 2025 If 10 moles of magnesium react with excess oxygen, calculate the theoretical yield of magnesium oxide (MgO). (Mg = 24 g/mol, O = 16 g/mol)
- 160 g
- 240 g
- 320 g
- 400 g
Answer: D
KMU 2024 What is the mass of 1 mole of calcium carbonate (CaCO3)?
- 50 g
- 75 g
- 100 g
- 125 g
Answer: C
KMU 2024 In the production of SO3 from SO2 and oxygen, the yield of SO3 is increased by:
- Adding a catalyst
- Adding more SO2
- Increasing temperature
- Removing oxygen
Answer: B
KMU 2024 What mass of aluminium oxide (Al2O3) is produced from 18.5 g of Al metal when it reacts completely with oxygen according to 4Al(s) + 3O2(g) → 2Al2O3(s)?
- 30.8 g
- 32.6 g
- 34.9 g
- 36.5 g
Answer: C
KMU 2024 When 4 g of magnesium was heated in excess oxygen, calculate the theoretical yield of magnesium oxide (MgO).
- 3.7 g
- 4.2 g
- 5.4 g
- 6.6 g
Answer: D
KMU 2024 Which of the following alkali metals forms only a normal oxide with O2?
- K
- Li
- Na
- Rb
Answer: B
KMU 2024 The third-period element that initially reacts rapidly with oxygen to form a protective oxide coating that prevents further reaction is:
- Al
- Mg
- Na
- Si
Answer: A
KMU 2024 Potassium ferrocyanide is which type of salt?
- Complex
- Double
- Mixed
- Normal
Answer: A
KMU 2024 The name of the ketone functional group is:
- Amino
- Carbonyl
- Carboxyl
- Formyl
Answer: B
KMU 2024 Which of the following elements cannot be detected directly in a given organic compound?
- Chlorine
- Nitrogen
- Oxygen
- Phosphorus
Answer: C
KMU 2024 A carbon atom carrying a positive charge and attached to three other atoms or groups is called a:
- Carbanion
- Carbene
- Carbocation
- Oxonium
Answer: C
KMU 2024 The reaction of an alcohol with sodium produces a/an:
- Aldehyde
- Alkoxide
- Ethane
- Ethene
Answer: B
ETEA 2017 Catalytic converter reduces the emission of
- Unburnt hydrocarbons
- CO
- NO
- All of the above
Answer: D
ETEA 2017 At standard conditions 45 litres of oxygen weigh about 64 g, whereas 45 litres of hydrogen weigh only 4 g. Which gas diffuses faster, and how much faster?
- Hydrogen, 4 times faster
- Hydrogen, 2 times faster
- Oxygen, 8 times faster
- Oxygen, 3 times faster
Answer: A
ETEA 2015 Conc. HCl is added to a metal salt and it is then subjected to a flame test on platinum wire. It imparts a crimson colour to the flame. Which metal salt is it?
- Sodium
- Potassium
- Strontium
- Calcium
Answer: C
ETEA 2015 Choose the correct order of reactivity of alkyl halides:
- R–I > R–Br > R–Cl > R–F
- R–Br > R–I > R–F > R–Cl
- R–F > R–Cl > R–Br > R–I
- R–Cl > R–I > R–Br > R–I
Answer: A
ETEA 2014 A tertiary carbon is bonded directly to:
- 2 hydrogens
- 2 carbons
- 3 carbons
- 4 carbons
Answer: C
ETEA 2014 The characteristic reaction of carboxylic acids (at the carbonyl carbon) is:
- Electrophilic substitution
- Nucleophilic substitution
- Electrophilic addition
- Nucleophilic addition
Answer: B
ETEA 2014 The compound used in the borax bead test for the detection of basic radicals to form a coloured bead is:
- H₃BO₃
- (C₂H₅)₃BO₃
- Ca₂B₆O₁₁·5H₂O
- Na₂B₄O₇·10H₂O
Answer: D
ETEA 2014 The partition coefficient of iodine between water and carbon tetrachloride is K = [I₂ in water]/[I₂ in CCl₄] = 1.17 × 10⁻². Choose the correct statement about the system:
- Iodine is extracted from the CCl₄ layer by water
- Iodine is extracted from the aqueous layer by CCl₄
- Iodine is more soluble in water than in CCl₄
- The value of K depends on the amount of iodine added
Answer: B
ETEA 2014 In which compound is the bond angle maximum?
- Methane
- Beryllium chloride
- Ammonia
- Boron trifluoride
Answer: B
ETEA 2013 Which product is formed when a monohydric alcohol reacts with sodium metal?
- Alkene
- Sodium alkoxide
- Alkane
- Ether
Answer: B
ETEA 2013 Which one of the following oxides exhibits amphoteric properties?
- K₂O
- MgO
- ZnO
- CaO
Answer: C
ETEA 2013 In the contact process, sulphur trioxide is dissolved in sulphuric acid to form oleum. The molecular formula of oleum is:
- H₂S₂O₃
- H₂S₂O₅
- H₂S₂O₆
- H₂S₂O₇
Answer: D
ETEA 2013 Phosphorus trihalides are readily hydrolysed: PX₃ + 3H₂O → H₃PO₃ + 3HX. Generally, moving from fluorine to iodine, the rate of hydrolysis:
- Increases
- Decreases
- Remains unchanged
- First increases and then decreases
Answer: A
ETEA 2012 Na₂B₄O₇·10H₂O is the formula of:
- Bauxite
- Borax
- Carborundum
- Colemanite
Answer: B
ETEA 2012 One mole is the amount of substance which contains as many elementary entities as there are atoms in:
- 0.12 kg of carbon-12
- 1.2 kg of carbon-12
- 0.012 kg of carbon-12
- 0.12 kg of oxygen-16
Answer: C
ETEA 2012 Sodium hydroxide acts on aluminium oxide to form:
- NaAlO₃
- Na₃Al₂O₆
- NaAlO₂
- NaAl₂O₃
Answer: C
ETEA 2012 The volume occupied by 3.2 g of oxygen at STP is:
- 22.4 dm³
- 2.24 dm³
- 11.2 dm³
- 16.0 dm³
Answer: B
Chemistry: Transition elements
KMU 2024 Heating 24.8 g of copper carbonate (CuCO3) in a crucible produced only 13.9 g of copper oxide (CuO). What is the percentage yield of copper oxide?
- 81.79%
- 83.98%
- 86.87%
- 89.68%
Answer: C
ETEA 2017 In movies, a blood-red solution is used as artificial blood. Which complex ion is used for this?
- [Fe(H2O)6]²⁺
- [Cu(NH3)4(H2O)2]²⁺
- [Fe(SCN)(H2O)5]²⁺
- [Fe(H2O)6]³⁺
Answer: C
ETEA 2015 Select the ligand which is bidentate and can form chelates:
- CH₃NH₂
- PH₃
- H₂O
- H₂N–CH₂–CH₂–NH₂ (ethylenediamine)
Answer: D
ETEA 2015 Select the correct formula of chloropentaaquachromium(III) chloride:
- [Cr(H₂O)₅Cl]Cl₃
- [Cr(H₂O)₅Cl]Cl₂
- [Cr(H₂O)₅Cl₂]Cl
- [Cr(H₂O)₅Cl₃]Cl
Answer: B
ETEA 2015 The components of the alloy bronze are:
- Copper and zinc
- Copper and tin
- Zinc and tin
- Chromium and tin
Answer: B
ETEA 2013 Which of the following furnaces is used for the production of wrought iron?
- Open hearth furnace
- Reverberatory furnace
- Bessemer converter
- Blast furnace
Answer: B
Chemistry: Fundamental principles of organic chemistry
KMU 2025 In which of the following species does the central atom use sp² hybridization?
- PH3
- NH3
- CH3⁺ (methyl carbocation)
- SbH3
Answer: C
KMU 2025 The IUPAC name of CH3CH2CH2C≡CH is:
- Hex-1-yne
- Pent-2-yne
- Pent-4-yne
- Pent-1-yne
Answer: D
KMU 2024 Pyridine belongs to which class of organic compounds?
- Alicyclic
- Heterocyclic
- Homocyclic
- Hydrocarbon
Answer: B
KMU 2024 Homolytic fission of a C–H bond in an alkane results in a/an:
- Alkyl free radical
- Carbanion
- Carbocation
- Methylpropane
Answer: A
ETEA 2015 Choose the IUPAC name of the compound CH₃–CH(CH₃)–CH₂–CH=CH₂:
- 4-Methyl-1-pentene
- 2-Methyl-3-pentene
- 2-Methyl-2-pentene
- 4,4-Dimethyl-2-pentene
Answer: A
ETEA 2015 100% transmission in IR spectroscopy means:
- No absorption
- 50% absorption
- 75% absorption
- 100% absorption
Answer: A
ETEA 2014 Ethanol (CH₃CH₂OH) and dimethyl ether (CH₃OCH₃) are best considered as:
- Structural isomers
- Stereoisomers
- Enantiomers
- Diastereomers
Answer: A
ETEA 2014 Diethyl ether and methyl propyl ether are:
- Conformational isomers
- Metamers
- Geometrical isomers
- Enantiomers
Answer: B
ETEA 2013 Which type of isomerism is exhibited by FCH=CHF?
- Chain isomerism
- Structural isomerism
- Geometrical isomerism
- Position isomerism
Answer: C
ETEA 2013 Which of the following is not a nucleophile?
- NH₃
- HO⁻
- HC≡CH
- Br⁻
Answer: C
ETEA 2013 Which isomers differ in both their physical and chemical properties?
- Chain isomers
- Position isomers
- Functional group isomers
- Both A and B
Answer: C
ETEA 2012 The knocking problem in fuel combustion can be avoided by:
- Reforming
- Improving the octane number
- Adding TEL
- All of the above
Answer: D
Chemistry: Hydrocarbons
KMU 2025 In the chlorination of methane to methyl chloride, the attack of a chlorine free radical on methane occurs in which phase?
- Before initiation
- Initiation
- Propagation
- Termination
Answer: C
KMU 2025 A student adds bromine water to ethene and observes rapid decolourisation. What makes ethene more reactive than ethane in this reaction?
- Ethene has a higher molecular mass
- Ethene contains a weak and exposed pi bond
- Ethane contains fewer sigma bonds
- Ethene undergoes substitution more readily
Answer: B
KMU 2025 What best describes the overall reaction in electrophilic aromatic substitution in benzene?
- Addition of an electrophile across a double bond
- Substitution of a halogen by a nucleophile
- Substitution of a proton (H⁺) by an electrophile on the aromatic ring
- Substitution of a methyl group by a nucleophile
Answer: C
KMU 2025 The addition of water to propene in the presence of sulphuric acid produces:
- Propanol (propan-1-ol)
- Propan-2-ol
- Butanol
- Ethanol
Answer: B
KMU 2024 Addition of HBr to isobutylene mainly gives:
- Isobutyl bromide
- n-Butyl bromide
- sec-Butyl bromide
- tert-Butyl bromide
Answer: D
ETEA 2017 The compound that cannot undergo addition reaction is:
- Cyclopropane
- Benzene
- Butyne
- None of the above
Answer: D
ETEA 2017 Benzene gives more stable product when undergo
- Nucleophilic addition reaction
- Oxidation reaction
- Electrophilic substitution reaction
- Electrophilic addition reaction
Answer: C
ETEA 2017 Choose the correct statement about cycloalkanes:
- Cyclopropane and cyclobutane are liquids at room temperature
- Cycloalkanes are insoluble in ethanol and ether but soluble in water
- Their melting and boiling points show a gradual increase with increasing molecular weight
- Both A and B are correct
Answer: C
ETEA 2017 Alcoholic KOH reacting with CH3CH2CH2CH2Br will undergo:
- Nucleophilic substitution reaction
- Elimination reaction
- Nucleophilic addition
- None of the above
Answer: B
ETEA 2017 Alkene + O3 → ozonide; with Zn/H2O it gives propanone + propanal. The IUPAC name of the alkene is:
- Hex-2-ene
- Hex-3-ene
- 2-Methylpent-1-ene
- 2-Methylpent-2-ene
Answer: D
ETEA 2015 Select the alkene from the following hydrocarbons:
- C₅H₁₂
- C₅H₁₀
- C₅H₈
- C₄H₁₀
Answer: B
ETEA 2015 Select cresol from the following benzene derivatives:
- Benzene-1,2,4-triol
- Catechol (1,2-dihydroxybenzene)
- Hydroquinone (1,4-dihydroxybenzene)
- 2-Methylphenol
Answer: D
ETEA 2014 When acetylene is passed through a hot iron tube at about 400 °C, it gives:
- Benzene
- Toluene
- o-Xylene
- m-Xylene
Answer: A
ETEA 2014 Which of the following substituents is ortho/para directing but ring deactivating?
- –OH
- –NH₂
- –Cl
- –OCH₃
Answer: C
ETEA 2014 Which of the following compounds undergoes nitration most readily?
- Benzene
- Toluene
- Benzoic acid
- Nitrobenzene
Answer: B
ETEA 2013 Which of the following is misnamed?
- Aniline
- Methyl naphthalene
- Carboxyl benzene
- Benzene sulphonic acid
Answer: C
ETEA 2013 Why is the boiling point of n-pentane about 28 °C higher than that of its isomer 2,2-dimethylpropane?
- The area of contact between 2,2-dimethylpropane molecules is small, which results in weak forces of attraction
- 2,2-Dimethylpropane molecules repel each other
- n-Pentane molecules cannot come into close contact with each other
- The shapes of molecules have no effect on boiling point
Answer: A
ETEA 2013 Which of the following functional groups is deactivating and not ortho/para directing?
- –R
- –COR
- –NH₂
- –NR₂
Answer: B
ETEA 2012 Benzene undergoes substitution reactions more easily than addition reactions because of:
- Its cyclic nature
- Having three double bonds
- Its aromatic character
- Delocalization of electrons
Answer: D
ETEA 2012 Bakelite is obtained from:
- Adipic acid and hexamethylenediamine
- Dimethyl terephthalate and ethylene glycol
- Neoprene
- Phenol and formaldehyde
Answer: D
ETEA 2012 Compared to benzene, nitration of toluene takes place at a:
- Slower rate
- Faster rate
- Same rate
- Rate that depends on the conditions
Answer: B
ETEA 2012 Ethene and ethyne can be distinguished by employing:
- Br₂ in organic solvent
- Baeyer’s reagent
- Phenylhydrazine
- Tollens’ reagent (ammoniacal silver nitrate)
Answer: D
ETEA 2012 Which is a trimer of ethyne?
- PVC
- Benzene
- Toluene
- Teflon
Answer: B
Chemistry: Alkyl halides and alcohols
KMU 2024 Dehydrohalogenation of an alkyl halide is carried out in the presence of:
- Alcoholic KOH
- Aqueous KOH
- Conc. H2SO4
- Zn dust
Answer: A
KMU 2024 Which of the following has the highest boiling point?
- Ethyl alcohol
- Isopropyl alcohol
- n-Propyl alcohol
- tert-Butyl alcohol
Answer: C
KMU 2024 Oxidation of a secondary alcohol gives a/an:
- Carboxylic acid
- Ether
- Ketone
- Phenol
Answer: C
ETEA 2017 Four beakers contain ethanol, ethanal, propanone and phenol separately. Aqueous bromine is added to each. A white precipitate is produced in one beaker. This beaker contains:
- Ethanol
- Phenol
- Ethanal
- Propanone
Answer: B
ETEA 2017 For the reactions (i) C2H2 + H2 → C2H6 and (ii) N2 + 3H2 → 2NH3, choose the catalysts employed:
- Ni for both reactions (i) and (ii)
- Fe2O3 for both reactions (i) and (ii)
- Ni for reaction (i) and Fe2O3 for (ii)
- Fe2O3 for reaction (i) and Ni for (ii)
Answer: C
ETEA 2015 Waxes are esters of high molecular weight fatty acids with:
- Monohydroxy alcohols
- Dihydroxy alcohols
- Trihydroxy alcohols
- All of the above
Answer: A
ETEA 2015 A hemiacetal contains both:
- Alcohol and aldehyde functional groups
- Alcohol (–OH) and ether (–OR) functional groups
- Aldehyde and ether functional groups
- Alcohol and carboxylic acid functional groups
Answer: B
ETEA 2015 Which is not true about Grignard reagents?
- They are highly reactive compounds
- They are very stable compounds and can be isolated easily
- They have synthetic importance
- They are represented by the general formula RMgX
Answer: B
ETEA 2013 To distinguish among primary, secondary and tertiary alcohols, which of the following tests is used?
- Benedict’s reagent
- Tollens’ reagent
- Lucas test
- None of the above
Answer: C
ETEA 2012 Rectified spirit is:
- 100% ethanol
- 95% ethanol
- 90% ethanol
- 35% ethanol
Answer: B
ETEA 2012 The Lucas test is used to detect the presence of:
- Alcohols
- Phenols
- Amino acids
- Carboxylic acids
Answer: A
ETEA 2012 Ketones are prepared by the oxidation of ____ with Na₂Cr₂O₇ and H₂SO₄.
- Primary alcohols
- Secondary alcohols
- Tertiary alcohols
- All of the above
Answer: B
Chemistry: Aldehydes and ketones
KMU 2024 Which aldehyde is more reactive towards nucleophilic addition?
- Acetaldehyde
- Butyraldehyde
- Formaldehyde
- Propionaldehyde
Answer: C
ETEA 2015 Select the test used for the estimation of glucose in blood and urine:
- Tollens’ reagent test
- Fehling’s solution test
- Benedict’s solution test
- All of the above
Answer: C
ETEA 2014 Which of the following compounds does not give the iodoform test with I₂ and NaOH?
- Propanone
- Ethanal
- Butanone
- 3-Pentanone
Answer: D
ETEA 2014 Which of the following compounds gives a positive test with Fehling’s solution?
- Acetone
- Ethyl acetate
- Formaldehyde
- Acetic acid
Answer: C
ETEA 2014 Polyhydroxy aldehydes or ketones are known as:
- Carbohydrates
- Proteins
- Lipids
- Vitamins
Answer: A
ETEA 2013 You are required to test for the presence of NH₄⁺ ions in water. Which reagent will solve your problem?
- Dimethylglyoxime
- Tollens’ reagent
- Nessler’s reagent
- Magneson reagent
Answer: C
ETEA 2013 Which of the following tests can be used to distinguish between aldehydes and ketones?
- Baeyer’s test
- Fehling’s test
- Silver mirror test
- Both B and C
Answer: D
ETEA 2012 Select the compound that will give a positive iodoform test:
- Benzaldehyde
- 2-Pentanone
- 3-Hexanone
- 3-Pentanone
Answer: B
Chemistry: Carboxylic acids and macromolecules
KMU 2025 A patient with pancreatic insufficiency shows reduced activity of an enzyme that hydrolyses the first peptide bond at the carboxyl end of proteins and peptides. Which enzyme is deficient?
- Elastase
- Pepsin
- Carboxypeptidase
- Collagenase
Answer: C
KMU 2025 An experiment shows that heating a protein disrupts the alpha-helix structure. Which protein structure is mainly affected?
- Primary
- Secondary
- Tertiary
- Quaternary
Answer: B
KMU 2024 One slice of bread with a tablespoon of peanut butter contains 20 g carbohydrate, 10 g protein and 9 g fat. Calculate the total energy consumed in this intake.
- 158 kcal
- 173 kcal
- 201 kcal
- 218 kcal
Answer: C
KMU 2024 The protein present in haemoglobin has ___ structure.
- Primary
- Secondary
- Tertiary
- Quaternary
Answer: D
ETEA 2017 Colloidal particles can be separated by using:
- Ordinary filter paper
- Coarse filter paper
- Fine filter paper
- Extremely fine filter paper (ultrafilter)
Answer: D
ETEA 2015 Choose the reactants whose reaction product is an ester:
- CH₃COOH and CH₃OCH₃
- CH₃COOH and C₂H₅OH
- CH₃COOH and CH₃CHO
- CH₃COOH and CH₃COCH₃
Answer: B
ETEA 2014 Saponification of a fat:
- Always results in the formation of soap only
- Results in the formation of esters
- Results in the formation of waxes
- Results in the formation of glycerol and soap
Answer: D
ETEA 2014 Which statement about paper chromatography is not correct?
- Paper chromatography is an example of partition chromatography
- Its greatest use is in the separation of biologically active systems
- It is also applicable for the separation of some inorganic cations
- Paper chromatography is always used for quantitative analysis
Answer: D
ETEA 2014 Which of the following polymers contains nitrogen?
- PVC
- Terylene
- Nylon
- Teflon
Answer: C
ETEA 2014 The major sources responsible for the presence of NO, N₂O and NO₂ in the atmosphere are:
- Fertilizers
- Biological decay of dead organisms
- Fossil fuel combustion
- All of these
Answer: D
ETEA 2014 A high molecular mass compound was hydrolysed and the product was found to be amino acids. The compound is a:
- Protein
- Carbohydrate
- Lipid
- Vitamin
Answer: A
ETEA 2013 Which one is a polymer substance?
- Glass
- Iron
- Plastic
- Copper
Answer: C
ETEA 2013 Which is not correct about polyvinyl chloride?
- It is used in large-scale production of cable insulation
- It is a copolymer
- It is a homopolymer
- It is used in the manufacture of pipes
Answer: B
ETEA 2013 Which one is not a nitrogenous fertilizer?
- Ammonium nitrate
- Triple phosphate
- Urea
- Nitrophosphate
Answer: B
ETEA 2013 Lipids are naturally occurring substances which are chemically:
- Proteins
- Amino acids
- Carbohydrates
- Esters
Answer: D
ETEA 2012 Lipids are chemically:
- Acids
- Alcohols
- Ethers
- Esters
Answer: D
ETEA 2012 Choose the correct statement:
- Aliphatic polyamides are generally known as nylons
- Aliphatic polyamides are generally known as polyesters
- Aliphatic polyamides are generally known as epoxy resins
- None of the above
Answer: A
ETEA 2012 All amino acids found in proteins are:
- α-amino acids
- β-amino acids
- Both α and β
- None of the above
Answer: A
ETEA 2012 Which of the following is a condensation polymer?
- Nylon 6,6
- Teflon
- Polypropylene
- Orlon
Answer: A
Chemistry: Mixed topics
KMU 2025 Which one of the following is a planar molecule?
- NH3
- H2O
- BF3
- CH4
Answer: C
KMU 2025 For the reaction 2A + B2 → 2AB, which of the following mixtures would make A the limiting reagent?
- 300 atoms of A and 400 molecules of B2
- 100 atoms of A and 50 molecules of B2
- 2 mol of A and 1 mol of B2
- 5 mol of A and 2.5 mol of B2
Answer: A
KMU 2024 Distillation under very reduced pressure is ___ distillation.
- Destructive
- Fractional
- Steam
- Vacuum
Answer: D
KMU 2024 The pKb of n-propylamine is:
- 3.24
- 3.28
- 3.32
- 3.35
Answer: C
KMU 2024 In competitive inhibition, the inhibitor:
- Binds with the substrate
- Competes with the enzyme
- Competes with the substrate
- Irreversibly binds with the enzyme
Answer: C
ETEA 2017 To differentiate between the white precipitate of AgCl and the off-white precipitate of AgBr, we use:
- Dilute NaOH solution
- Dilute Pb(NO3)2 solution
- Dilute NH3 solution
- Dilute FeCl3 solution
Answer: C
ETEA 2017 The compound which can be hydrolysed by water is:
- CCl4
- SiCl4
- CH4
- None of the above
Answer: B
ETEA 2017 The compound most resistant to thermal decomposition is:
- Li2CO3
- NaNO3
- Ba(NO3)2
- Na2CO3
Answer: D
ETEA 2017 Choose the products of the reaction CH3C≡N + 2H2O + HCl →
- CH3COOH + NH3
- CH3COOH + NH4Cl
- CH3COCl + NH3
- CH3CONH2
Answer: B
ETEA 2017 Choose the mercaptan from the following:
- R–S–R
- R–S–H
- R–O–R
- R–O–H
Answer: B
ETEA 2015 Aiman dissolved 4 g of NaOH in water to make 250 ml of solution. The molarity of this solution is:
- 0.4 M
- 4 M
- 0.2 M
- 0.1 M
Answer: A
ETEA 2015 For salts which dissolve in water with the evolution of heat, the effect of temperature on their solubility will be that:
- Solubility increases with increase in temperature
- Solubility decreases with increase in temperature
- Solubility does not change
- In some cases it increases while in others it decreases
Answer: B
ETEA 2015 What is true about the modern (spectroscopic) methods used in the determination of the structure of compounds?
- Accurate but more time-consuming
- Accurate and rapid, but chemicals are used in large amounts
- Accurate and rapid, but sophisticated and complicated
- Accurate, simple and less time-consuming
Answer: C
ETEA 2015 Choose the correct reaction:
- PbO + 4NaOH → Pb(OH)₄ + 2Na₂O
- PbO + 2NaOH + H₂O → Na₂[Pb(OH)₄]
- PbO + NaOH + H₂O → Na[Pb(OH)₃]
- PbO + 4NaOH + H₂O → Na₄[Pb(OH)₆]
Answer: B
ETEA 2014 The carbylamine test is given by:
- Primary amines
- Secondary amines
- Tertiary amines
- All of these
Answer: A
ETEA 2014 Which of the following compounds is assigned an octane number of 100?
- n-Heptane
- n-Octane
- 2,3,3-Trimethylpentane
- 2,2,4-Trimethylpentane
Answer: D
ETEA 2014 Which one of the following does not exist?
- HBO₂
- HFO₂
- H₃PO₃
- HBrO₂
Answer: B
ETEA 2014 Sucrose is considered a:
- Monosaccharide
- Disaccharide
- Polysaccharide
- None of these
Answer: B
ETEA 2013 If 20.0 cm³ of a 0.5 M solution is diluted to 1.0 dm³, what will be its new concentration?
- 0.001 M
- 0.01 M
- 1.0 M
- 10.0 M
Answer: B
ETEA 2013 Which one of the following salts will produce an alkaline solution when dissolved in water?
- NH₄Cl
- NaNO₃
- Na₂CO₃
- Na₂SO₄
Answer: C
ETEA 2013 Which layer of the atmosphere has the lowest temperature?
- Troposphere
- Stratosphere
- Mesosphere
- Thermosphere
Answer: C
ETEA 2013 Which one is least reactive towards reaction with Na?
- CH₃–OH
- CH₃–C≡CH
- CH₃–O–CH₃
- CH₃–COOH
Answer: C
ETEA 2012 The ring test is shown by compounds having a:
- Sulphate radical
- Chloride radical
- Nitrate radical
- None of the above
Answer: C
ETEA 2012 Which of the following compounds will liberate CO₂ on treatment with NaHCO₃?
- CH₃COOH
- C₂H₅NH₂
- CH₃COCH₃
- CH₃CH₂OH
Answer: A
ETEA 2012 A commonly used coagulant for the purification of water is:
- Ca(NO₃)₂
- MgCl₂
- Al₂(SO₄)₃
- Ca(OH)₂
Answer: C
ETEA 2012 Which compound is formed when ammonium hydroxide is added to silver chloride?
- [Ag(NH₃)₂]Cl
- [Ag(NH₃)]Cl
- [Ag(NH₃)₄]Cl
- [Ag(NH₃)₆]Cl
Answer: A