Practise 91 MDCAT Chemistry MCQs on Thermochemistry, arranged according to the PMDC MDCAT syllabus. This chapter covers exothermic and endothermic reactions, enthalpy and standard conditions, enthalpies of formation, combustion and neutralisation, Hess's law, bond energies, the Born-Haber cycle and the first law of thermodynamics.
Every question has an answer and a short explanation. Use practice mode for instant feedback, or take a timed test and review your answers at the end. Your progress is saved on this device. This page includes 15 new questions written by MDCAT City and 76 from our Chemistry question bank.
More chapters: all Chemistry MCQs, chapter by chapter.
Thermochemistry MCQs
For an exothermic reaction, ΔH is:
- Positive
- Negative
- Zero
- Always equal to ΔG
Answer: B
Heat is released to the surroundings, so the enthalpy of the system decreases.
Hess’s law states that the enthalpy change of a reaction:
- Depends on the route taken
- Is independent of the route taken
- Is always negative
- Equals the activation energy
Answer: B
The total enthalpy change is the same whether the reaction happens in one step or several.
The standard enthalpy of formation of an element in its standard state is:
- Zero
- Always positive
- Always negative
- Equal to its bond energy
Answer: A
By definition, elements in their standard states have ΔHf° = 0.
The enthalpy of neutralisation of a strong acid by a strong base is about:
- −57 kJ mol⁻¹
- −27 kJ mol⁻¹
- +57 kJ mol⁻¹
- −114 kJ mol⁻¹
Answer: A
It is essentially H⁺ + OH⁻ → H₂O, about −57 kJ per mole of water formed.
Dissolving ammonium nitrate in water makes the solution feel cold. The process is:
- Exothermic
- Endothermic
- Neither
- Explosive
Answer: B
Heat is absorbed from the surroundings, so ΔH is positive.
Standard enthalpy changes are measured at:
- 0 °C and 1 atm
- 298 K and 1 atm (about 101 kPa)
- 373 K and 2 atm
- 273 K and 0 atm
Answer: B
Standard conditions are 25 °C (298 K) and 1 atm.
The standard enthalpy of combustion of a fuel is always:
- Positive
- Negative
- Zero
- Equal to its enthalpy of formation
Answer: B
Combustion releases energy, so it is exothermic.
Lattice energy is the enthalpy change when one mole of an ionic solid is formed from its:
- Elements in their standard states
- Gaseous ions
- Atoms in the liquid state
- Molecules in solution
Answer: B
It measures the strength of the ionic lattice.
A Born–Haber cycle is used to calculate:
- Activation energy
- Lattice energy
- Bond length
- pH
Answer: B
It applies Hess’s law to the formation of an ionic compound.
In the equation q = mcΔT, c stands for:
- Concentration
- Specific heat capacity
- Speed of light
- Coulombs
Answer: B
c is the energy needed to raise 1 g of a substance by 1 K.
A system that exchanges neither matter nor energy with its surroundings is:
- Open
- Closed
- Isolated
- Adiabatic only
Answer: C
An ideal thermos flask approximates an isolated system.
Which of these is a state function?
- Work
- Heat
- Enthalpy
- Distance travelled
Answer: C
A state function depends only on the initial and final states, not on the path.
Breaking chemical bonds is always:
- Exothermic
- Endothermic
- Neither
- Spontaneous
Answer: B
Energy must be supplied to separate bonded atoms.
The enthalpy of atomisation is the energy needed to form one mole of:
- Gaseous ions
- Gaseous atoms from the element
- Liquid molecules
- A solid lattice
Answer: B
For example, ½Cl₂(g) → Cl(g).
The enthalpy of solution refers to:
- Burning one mole of solute
- Dissolving one mole of solute in a large amount of solvent
- Melting one mole of solid
- Neutralising an acid
Answer: B
It can be exothermic or endothermic.
The first law of thermodynamics can be written as:
- ΔE = q + w
- ΔE = q × w
- ΔS = q/T
- ΔG = ΔH − TΔS only
Answer: A
The change in internal energy equals heat added plus work done on the system.
PMC Practice Test If Water is present on a cup placed on a table, what will be the system in this case?
- Water
- Water in cup
- Whole table
- All of these
Answer: A
PMC Practice Test The formation of a negative ion (first electron affinity) is a/an ___ process.
- Exothermic
- Endothermic
- Both A and B
- None of these
Answer: A
PMC Practice Test For the reaction ½H₂ → H, the enthalpy change is called the:
- Enthalpy of formation
- Enthalpy of neutralization
- Enthalpy of atomization
- Enthalpy of Reaction
Answer: C
PMC Practice Test Falling water of a waterfall is an example of
- Reversible Reaction
- Spontaneous Reactions
- Endothermic Reactions
- All of these
Answer: B
PMC Practice Test Which one of the following is the correct value for the enthalpy of formation of CO?
- -110kJ/mol
- -210kJ/mol
- -111kJ/mol
- None of these
Answer: A
PMC Practice Test Areaction which does not occur in nature are
- Spontaneous Reactions
- Exothermic Reactions
- Endothermic Reactions
- Nonspontaneous Reactions
Answer: D
PMC Practice Test The production of ammonia by the Haber process is a/an:
- Endothermic Reaction
- Exothermic Reaction
- Irreversible Reaction
- Redox Reaction
Answer: B
PMC Practice Test The heat absorbed by a substance at constant pressure is equal to:
- ΔG
- ΔH
- ΔE
- ΔH − ΔE
Answer: B
PMC Practice Test Combustion is always a/an:
- Exothermic reaction
- Endothermic reaction
- Spontaneous reaction
- Nonspontaneous reaction
Answer: A
PMC Practice Test The reactions that release heat are called as?
- Endothermic reactions
- Exothermic reactions
- Endergonic reactions
- Heat gaining reactions
Answer: B
PMC Practice Test When does it mean, when a reaction is exothermic?
- Energy content of product is more
- Energy content of reactant is less
- Heat is transferred from the system to surrounding
- Heat is transferred from the Surrounding to the system
Answer: C
PMC Practice Test The lack of methods to measure heats of some reactions accurately makes thermochemistry:
- Widely applicable in science
- A Limited field of study
- A Useful aspect of Industrial research
- None of these
Answer: B
PMC Practice Test The study of heat changes in chemical reactions is called:
- Electrochemistry
- Biochemistry
- Thermochemistry
- Analytical Chemistry
Answer: C
PMC Practice Test At which temperature are standard enthalpies measured?
- 373K
- 298K
- 350K
- All of these
Answer: B
PMC Practice Test What is the enthalpy of neutralization when one mole of a strong acid reacts with one mole of a strong base?
- - 60.5 kJ/mol
- -46.5kJ/mol
- -70.5 kJ/mol
- -57.4kJ/mol
Answer: D
PMC Practice Test Evaporation isa process?
- Exothermic
- Spontaneous
- Non-Spontaneous
- None of these
Answer: B
PMC Practice Test Decomposition of Water into Hydrogen and oxygen is a
- Reversible Reaction
- Endothermic Reaction
- Exothermic Reaction
- Oxidation Reaction
Answer: B
PMC Practice Test For the reaction NaOH + HCl → NaCl + H₂O, the enthalpy change is called the:
- Enthalpy of formation
- Enthalpy of neutralization
- Enthalpy of Sublimation
- Enthalpy of reaction
Answer: B
PMC Practice Test Which of these processes has a positive enthalpy change?
- Combustion
- Neutralization
- Atomization
- All of these
Answer: C
PMC Practice Test Enthalpy is the sum of the internal energy and the:
- Pressure–volume work (PV)
- Entropy
- Potential energy
- Kinetic energy
Answer: A
PMC Practice Test The sum of all kinds of energy in a system is called its:
- Total energy
- Kinetic Energy
- Potential Energy
- Internal Energy
Answer: D
PMC Practice Test In exothermic reactions, heat is:
- Taken in
- Give out to surroundings
- Neither given nor lost
- None of these
Answer: B
PMC Practice Test Which statement about heat energy is correct?
- Path function
- State function
- Move from cold to hot body
- Property of a system
Answer: A
PMC Practice Test Energy is absorbed in:
- In Bond Breaking
- In endothermic reactions
- In Bond Formation
- Both A and B
Answer: D
PMC Practice Test Hess law states that the total enthalpy change of a reaction remains same regardless of
- Route reaction takes for completion
- Temperature of reactants
- Concentration of products
- Concentration of reactants
Answer: A
PMC Practice Test The enthalpy of a system is given as:
- ΔH = qv + w
- H = E + PV
- H = qp + PV
- H = E
Answer: B
PMC Practice Test The property of the system which does not depend upon the path followed by the system is called as?
- State function
- Path function
- Dependent function
- Independent function
Answer: A
PMC Practice Test In Thermodynamic terms boundary separates uy
- Surrounding from the environment
- Reactants from contamination
- System from surrounding
- Products from the surrounding
Answer: C
PMC Practice Test Heat supplied at constant pressure equals to
- Activation Energy
- Internal energy change
- Entropy
- Enthalpy
Answer: D
PMC Practice Test In Chemistry the work is generally
- Done by Temperature change
- Pressure - Temperature Work
- Pressure Volume Work
- None of these
Answer: C
PMC Practice Test Anything under test or observation in laboratory is called
- Surrounding
- System
- Confined space
- None of these
Answer: B
PMC Practice Test A state function depends upon the:
- Initial condition of the system
- Final condition of the system
- Path of the system
- Both initial and final condition of the system
Answer: D
PMC Practice Test What does thermodynamics means?
- Study of change in state of the system
- Study of energy changes during a process
- Study of material content of a system
- All of these
Answer: B
PMC Practice Test Heat is the energy that flows across the
- Surroundings
- Boundaries of the system
- Only within the system
- All of these
Answer: B
PMC Practice Test The heat of neutralization of a strong acid with a strong base is always:
- Constant
- Variable
- Depends on the strength of acid
- Depends on the strength of base
Answer: A
PMC Practice Test The flow of heat from a hot body to a cold body is a/an ___ process.
- Reversible
- Irreversible
- Depends on conditions
- Conduction process
Answer: B
PMC Practice Test At what pressure is oxygen maintained inside a bomb calorimeter?
- 200 atm
- 25 atm
- 20 atm
- 75 atm
Answer: C
PMC Practice Test Bond formation is associated with:
- Release of energy
- Gain of energy
- No energy change
- Sharing of nucleus
Answer: A
PMC Practice Test The energy released when one mole of an ionic crystal is formed from its gaseous ions is the:
- Activation energy
- Potential energy
- Energy of formation
- Lattice Energy
Answer: D
PMC Practice Test The enthalpy of solution of Na₂CO₃ corresponds to a/an:
- Exothermic reaction
- Endothermic reaction
- Spontaneous reaction
- Nonspontaneous reaction
Answer: A
PMC Practice Test How enthalpy changes of reactions can be measured?
- By spectrometry
- By conductometry
- By calorimetry
- By refractometry
Answer: C
PMC Practice Test The imaginary surface separating a system from its surroundings is called the:
- Buffer
- Transition Zone
- Boundary
- Intermediate state
Answer: C
PMC Practice Test Which law states that the net heat change of a reaction is the same whether it takes place in one step or several steps?
- Born Haber cycle
- Joule’s principle
- Hess's law
- Law of conservation of energy
Answer: C
PMC Practice Test One calorie is equal to:
- 4.398 J
- 7.98 J
- 4.18 J
- 8.215 J
Answer: C
PMC Practice Test Which quantity alone can predict whether a reaction will be spontaneous or non-spontaneous?
- Enthalpy Change
- Free Energy of the system
- Energy Change
- Temperature Change
Answer: B
PMC Practice Test In thermodynamics, anything under study is called the:
- Analyte
- System
- Surrounding
- Boundary
Answer: B
PMC Practice Test A system is the part of the universe that is:
- Real
- Unreal
- Imaginary
- Both real or imaginary
Answer: D
PMC Practice Test The sum of the potential and kinetic energies of a system is called its:
- Entropy
- Enthalpy
- Internal Energy
- Heat Energy
Answer: C
PMC Practice Test State functions are independent of the:
- Enthalpy Change
- Surroundings
- Path of the reaction
- System
Answer: C
PMC Practice Test The enthalpy of a system is also called its:
- Entropy
- Work function
- Total heat content
- Internal energy
Answer: C
PMC Practice Test Hess's law is also known as the:
- Law of heat summation
- Law of constant heat capacity
- Law of mass action
- Law of conservation of mass
Answer: A
PMC Practice Test Internal energy is ___ of the path.
- Independent
- Dependent
- Highly dependent
- Not enough information
Answer: A
PMC Practice Test Reactions that absorb energy are called:
- Endothermic reactions
- Exothermic reactions
- Exergonic reactions
- Heat releasing reactions
Answer: A
PMC Practice Test Which molar heat has the highest ΔH value?
- Heat of fusion
- Heat of vapourization
- Heat of sublimation
- Heat of evaporation
Answer: C
PMC Practice Test ΔH for an exothermic reaction is:
- More than 1
- Positive
- Negative
- Neutral
Answer: C
PMC Practice Test Hess's law is a simple application of the:
- Law of Mass Action
- Law of conservation of energy
- Law of conservation of mass
- Dalton's Law of partial pressure
Answer: B
PMC Practice Test Which one is NOT a state function?
- Internal Energy
- Enthalpy
- Work
- None of these
Answer: C
PMC Practice Test Which of the following is NOT a state function?
- Temperature (T)
- Volume (V)
- Enthalpy (H)
- Heat (q)
Answer: D
PMC Practice Test Which of the following is an exothermic process?
- Evaporation
- Fusion
- Sublimation
- Respiration
Answer: D
PMC Practice Test The specific heat of water is:
- 1 L/kg
- 4.18 J/kg K
- 4180 J/kg K
- 2090 J/kg K
Answer: C
A reaction that releases heat to the surroundings is:
- Adiabatic
- Exothermic
- Isothermal
- Endothermic
Answer: B
Exothermic reactions give out heat.
For an exothermic reaction, ΔH is:
- Infinite
- Zero
- Positive
- Negative
Answer: D
The system loses heat, so its enthalpy decreases (ΔH < 0).
The standard enthalpy of formation of an element in its standard state is:
- Always negative
- Always positive
- Zero
- 100 kJ/mol
Answer: C
By definition, elements in their standard states have ΔHf° = 0.
Hess's law is an application of the law of:
- Conservation of energy
- Mass action
- Multiple proportions
- Definite proportions
Answer: A
The total enthalpy change is the same whatever route is taken.
The enthalpy change when 1 mole of a substance is completely burnt in oxygen is the enthalpy of:
- Atomisation
- Formation
- Combustion
- Neutralisation
Answer: C
Enthalpies of combustion are always negative.
The enthalpy of neutralisation of a strong acid by a strong base is about:
- −57.3 kJ/mol
- 0 kJ/mol
- −890 kJ/mol
- +57.3 kJ/mol
Answer: A
It is essentially H+ + OH− → H2O, which releases about 57.3 kJ per mole of water.
Standard conditions for thermochemical data are:
- 0 °C and 1 atm
- 25 °C (298 K) and 1 atm
- 25 °C and 2 atm
- 100 °C and 1 atm
Answer: B
Standard enthalpy values are quoted at 298 K and 1 atm.
Lattice energy is usually calculated indirectly using the:
- Krebs cycle
- Haber process
- Carnot cycle
- Born-Haber cycle
Answer: D
The Born-Haber cycle applies Hess's law to ionic compound formation.
The energy needed to break 1 mole of a covalent bond in the gaseous state is the:
- Lattice energy
- Electron affinity
- Enthalpy of solution
- Bond dissociation energy
Answer: D
Bond breaking always needs energy (endothermic).
The first law of thermodynamics states that:
- Heat flows from cold to hot
- Entropy always increases
- Energy can neither be created nor destroyed
- Absolute zero can be reached
Answer: C
It is the law of conservation of energy: ΔE = q + w.
For a reaction with no change in the number of gas moles, ΔH and ΔE are:
- Opposite in sign
- Both always zero
- Very different
- Equal
Answer: D
ΔH = ΔE + ΔnRT; with Δn = 0, ΔH = ΔE.
A bomb calorimeter measures the heat change at constant:
- Pressure
- Entropy
- Volume
- Temperature
Answer: C
The sealed bomb keeps volume constant, so it measures ΔE.
Dissolving NH4Cl in water makes the solution cold. This process is:
- Exothermic
- Neutral
- Endothermic
- Explosive
Answer: C
Heat is absorbed from the water, so the temperature falls.
A system that can exchange energy but not matter with its surroundings is:
- Isolated
- Closed
- Adiabatic
- Open
Answer: B
A closed system exchanges energy only.
State functions such as enthalpy depend only on the:
- Initial and final states
- Catalyst used
- Time taken
- Path taken
Answer: A
This is why Hess's law works.