Thermodynamics MCQs for MDCAT (Physics) – 89 with Answers

Practise 89 MDCAT Physics MCQs on Thermodynamics, arranged according to the PMDC MDCAT syllabus. This chapter covers the first law of thermodynamics, isothermal and adiabatic processes, molar specific heats, heat engines and the Carnot cycle, the second law, entropy and refrigerators.

Every question has an answer and a short explanation. Use practice mode for instant feedback, or take a timed test and review your answers at the end. Your progress is saved on this device. This page includes 10 new questions written by MDCAT City and 79 from our Physics question bank.

More chapters: all Physics MCQs, chapter by chapter.

Thermodynamics MCQs

The first law of thermodynamics is a statement of conservation of:

  1. Momentum
  2. Mass
  3. Energy
  4. Charge

Answer: C

Q = ΔU + W: heat supplied increases internal energy and does work.

In an isothermal process for an ideal gas:

  1. Temperature stays constant
  2. No heat is exchanged
  3. Volume stays constant
  4. Pressure stays constant

Answer: A

Since T is constant, the internal energy of an ideal gas does not change.

In an adiabatic process:

  1. Temperature stays constant
  2. No heat enters or leaves the system
  3. Pressure stays constant
  4. Work done is zero

Answer: B

Q = 0, so any work done changes the internal energy.

A Carnot engine works between 600 K and 300 K. Its efficiency is:

  1. 25%
  2. 50%
  3. 75%
  4. 100%

Answer: B

η = 1 − T₂/T₁ = 1 − 300/600 = 0.5 = 50%.

In any natural (irreversible) process, the total entropy of the universe:

  1. Decreases
  2. Stays constant
  3. Increases
  4. Becomes zero

Answer: C

This is one statement of the second law of thermodynamics.

The zeroth law of thermodynamics is the basis of:

  1. Heat engines
  2. Temperature measurement
  3. Refrigeration
  4. Entropy

Answer: B

Bodies in thermal equilibrium with a third body are in equilibrium with each other, which is how thermometers work.

The internal energy of an ideal gas depends only on its:

  1. Pressure
  2. Volume
  3. Temperature
  4. Shape of container

Answer: C

It is the total kinetic energy of the molecules, which depends on temperature.

A heat engine converts:

  1. Work into heat
  2. Heat into work
  3. Light into heat
  4. Sound into work

Answer: B

It takes heat from a hot source, does work and rejects some heat to a cold sink.

A refrigerator transfers heat from:

  1. Hot to cold without work
  2. Cold to hot using work
  3. Hot to cold using work
  4. Nowhere

Answer: B

Work is needed to move heat against its natural direction.

For an ideal gas, Cₚ − Cᵥ equals:

  1. Zero
  2. R
  3. 2R
  4. R/2

Answer: B

This is Mayer’s relation for molar specific heats.

In an isochoric (constant-volume) process, the work done by the gas is:

  1. Maximum
  2. Zero
  3. Equal to the heat supplied
  4. Negative

Answer: B

W = PΔV and ΔV = 0.

Heat flows naturally from:

  1. Cold bodies to hot bodies
  2. Hot bodies to cold bodies
  3. Large bodies to small bodies
  4. Dense bodies to light bodies

Answer: B

This is one way of stating the second law.

A temperature of 27 °C is equal to:

  1. 246 K
  2. 300 K
  3. 273 K
  4. 327 K

Answer: B

K = °C + 273 = 300 K.

In an isobaric process, which quantity remains constant?

  1. Volume
  2. Temperature
  3. Pressure
  4. Heat

Answer: C

“Iso-baric” means equal pressure.

The specific heat capacity of water is about:

  1. 420 J kg⁻¹ K⁻¹
  2. 4200 J kg⁻¹ K⁻¹
  3. 42 000 J kg⁻¹ K⁻¹
  4. 4.2 J kg⁻¹ K⁻¹

Answer: B

Water’s high specific heat helps stabilise temperatures.

During melting, a substance absorbs heat without a rise in temperature. This heat is called:

  1. Specific heat
  2. Latent heat
  3. Radiant heat
  4. Kinetic energy

Answer: B

It is used to break bonds between particles.

The Kelvin–Planck statement of the second law says that no engine can:

  1. Do any work
  2. Convert all the heat it absorbs into work
  3. Use a cold reservoir
  4. Run on gas

Answer: B

Some heat must always be rejected to a colder sink.

A heat pump used for heating a house moves heat from the:

  1. House to the outside
  2. Cold outside into the warmer house
  3. Sun into the ground
  4. Floor to the ceiling

Answer: B

It uses work to pump heat against the temperature gradient.

PMC Practice Test First law of thermodynamics is a special case of

  1. Newton's law
  2. Charles's law
  3. Conservation of energy
  4. Conservation of entropy

Answer: C

PMC Practice Test When no heat enters or leaves the system, the process is called:

  1. Isothermal
  2. Adiabatic
  3. Isovolumetric
  4. Isobaric

Answer: B

PMC Practice Test What is the change in internal energy of a system that has absorbed 800 J of heat and done 500 J of work?

  1. 200 J
  2. 550 J
  3. 600 J
  4. 300 J

Answer: D

PMC Practice Test The statement "the energy of a system and its surroundings is conserved" is related to which law of thermodynamics?

  1. First law
  2. Second law
  3. Third law
  4. None of these

Answer: A

PMC Practice Test When temperature of the system does not change, it is called:

  1. Isothermal
  2. Adiabatic
  3. Isovolumetric
  4. Isobaric

Answer: A

PMC Practice Test Which of the following is an example of isothermal process?

  1. The rapid escape of air from a burst tyre
  2. The rapid expansion and compression of air through which a sound wave is passing
  3. Cloud formation in the atmosphere
  4. Slow compression or expansion of gas

Answer: D

PMC Practice Test For an adiabatic process, the first law of thermodynamics can be written as

  1. Work done by the system = decrease in internal energy of system
  2. Work done by the system = increase in internal energy of system
  3. Work done on the system = decrease in internal energy of system
  4. Work done on the system = decrease in internal energy of system + heat released

Answer: A

PMC Practice Test Internal energy remains same throughout the process in

  1. Adiabatic process
  2. Isothermal process
  3. Cyclic process
  4. Both (i) and (ii)

Answer: B

PMC Practice Test Woollen clothes keep the body warm because wool is a:

  1. Bad conductor of heat
  2. Good conductor of heat
  3. Low-temperature material
  4. None of these

Answer: A

PMC Practice Test Which statement is incorrect?

  1. In an isobaric process, ΔP = 0
  2. In an isochoric process, ΔW = 0
  3. In an isothermal process, ΔT = 0
  4. In an isothermal process, ΔQ = 0

Answer: D

PMC Practice Test Which surface will absorb the most light?

  1. Yellow painted
  2. Blue painted
  3. White painted
  4. Black painted

Answer: D

PMC Practice Test What is the change in internal energy of a system that absorbs 2 kcal of heat and does 500 J of work? (1 cal = 4.2 J)

  1. 8900 J
  2. 8800 J
  3. 7900 J
  4. 7500 J

Answer: C

PMC Practice Test A system goes from one state to the same final state by two different paths. If Q₁, W₁ and Q₂, W₂ are the heat absorbed and work done along each path, then:

  1. Q₁ = Q₂
  2. W₁ = W₂
  3. Q₁ + W₁ = Q₂ + W₂
  4. Q₁ − W₁ = Q₂ − W₂

Answer: D

PMC Practice Test The energy input to an engine is 60 J and the work it performs is 15 J. What fraction of the energy input is expelled as heat?

  1. 25%
  2. 75%
  3. 100%
  4. Impossible to determine

Answer: B

PMC Practice Test A heat engine performs 100 J of work and rejects 400 J of heat to the cold reservoir. Its efficiency is:

  1. 20%
  2. 25%
  3. 4%
  4. 50%

Answer: A

PMC Practice Test Heat transfer by radiation can occur through:

  1. Solid
  2. Liquid
  3. Gas
  4. Vacuum

Answer: D

PMC Practice Test Law of conservation of energy is actually

  1. Second law of thermodynamics
  2. Third Law of Thermodynamics
  3. First Law of Thermodynamics
  4. Zeroth law of Thermodynamics

Answer: C

PMC Practice Test Two identical gas samples expand by the same volume (i) isothermally and (ii) adiabatically. More work is done in the:

  1. Isothermal process
  2. Adiabatic process
  3. Neither of them
  4. Equal in both cases

Answer: A

PMC Practice Test By the sign convention of the first law, which of the following is taken as positive?

  1. Heat lost by the system
  2. Work done on the system
  3. Work done by the system
  4. ΔE when heat is lost

Answer: B

PMC Practice Test Two objects of different sizes, masses and temperatures are placed in thermal contact. In which direction does energy (heat) flow?

  1. Energy travels from the larger object to the smaller object
  2. Energy travels from the object with more mass to the one with less mass
  3. Energy travels from the object at higher temperature to the object at lower temperature
  4. Energy does not travel

Answer: C

PMC Practice Test One kilocalorie is equal to:

  1. 4.18 J
  2. 4180 J
  3. 2.09 J
  4. 2090 J

Answer: B

PMC Practice Test When a substance is heated, the energy of its atoms or molecules increases. This means:

  1. Heat is converted to internal energy
  2. Heat is converted to only potential energy of the particles
  3. Heat is converted to only kinetic energy of the particles
  4. Heat is converted to temperature of gas

Answer: A

PMC Practice Test In a (reversible) adiabatic process, which remains constant?

  1. Total heat
  2. Work done
  3. Entropy
  4. Both A and C

Answer: D

PMC Practice Test A gas expands from V₁ to V₂. The work done is greatest in which process?

  1. Adiabatic
  2. Isobaric
  3. Isochoric
  4. Isothermal

Answer: B

PMC Practice Test Which of the terms is related with thermodynamics

  1. System
  2. Surrounding
  3. Boundary
  4. All of these

Answer: D

PMC Practice Test A 500 W electric heater is used to heat 1 kg of water without energy losses. The specific heat capacity of water is 4.2 kJ kg⁻¹ K⁻¹ . What is the time taken to heat the water from 25 °C to 75 °C?

  1. 7 seconds
  2. 42 seconds
  3. 7 minutes
  4. 420 minutes

Answer: B

PMC Practice Test At what temperature does water have its maximum density?

  1. 2 °C
  2. 4 °C
  3. 0 °C
  4. Below 0 °C

Answer: B

PMC Practice Test The energy input to an engine is 4.00 times the work it performs. What fraction of the input is expelled as heat?

  1. 0.25
  2. 0.75
  3. 1
  4. Impossible to determine

Answer: B

PMC Practice Test Which of the following blocks will release heat fast

  1. Rough white surface
  2. Polished white surface
  3. Rough black surface
  4. Polished black surface

Answer: C

PMC Practice Test Work done in an adiabatic process in a gas depends on

  1. Change in pressure
  2. Change in temperature
  3. Change in Volume
  4. All of these

Answer: B

PMC Practice Test In Thermodynamics first law is related with

  1. Pressure conservation
  2. Entropy conservation
  3. Temperature conservation
  4. Energy Conservation

Answer: D

PMC Practice Test For a reversible process, necessary condition is

  1. Heat energy should be zero
  2. Process must be fast
  3. Process must be quasistatic
  4. Process must not be in equilibrium

Answer: C

PMC Practice Test Under a cyclic path, internal energy after complete cycle is same as

  1. 2(initial)
  2. Initial heat
  3. Initial internal energy
  4. Initial work

Answer: C

PMC Practice Test The first law of thermodynamics is:

  1. ΔE = ΔH
  2. ΔE = q + P
  3. ΔE = q + w
  4. ΔE = PΔV

Answer: C

PMC Practice Test An ideal reversible heat engine has:

  1. 1 efficiency
  2. Highest efficiency
  3. An efficiency which depends on the nature of substance
  4. None of these

Answer: B

PMC Practice Test The energy input to an engine is 60 J, and the work it performs is 15 J. What is its thermal efficiency?

  1. 4.00
  2. 1.00
  3. 0.25
  4. Impossible to determine

Answer: C

PMC Practice Test In an adiabatic expansion:

  1. ΔU = 0
  2. ΔU is negative
  3. ΔU is positive
  4. ΔW = 0

Answer: B

PMC Practice Test "The heat required to raise the temperature of one mole of a gas through 1 K at constant pressure" is called the:

  1. The molar specific heat at constant pressure
  2. Molar heat capacity
  3. Specific latent heat
  4. Specific heat capacity

Answer: A

PMC Practice Test The efficiency of a Carnot engine can never be 1 (100%) because:

  1. We can not achieve the higher temperature
  2. We do not have an ideal working substance
  3. There is always energy losses
  4. We need cold reservoir at absolute zero temperature, which is not available

Answer: D

PMC Practice Test Isothermal system has constant

  1. Temperature
  2. Pressure
  3. Entropy
  4. Energy Conservation

Answer: A

PMC Practice Test If two bodies have same temperature the rate of heat transfer between them is

  1. Infinite
  2. Zero
  3. Double the temperature
  4. None of these

Answer: B

PMC Practice Test "The heat required to raise the temperature of one mole of a substance through 1 K" is called:

  1. Specific latent heat
  2. Molar heat capacity
  3. Molar specific heat
  4. Specific heat capacity

Answer: C

PMC Practice Test An ideal reversible heat engine is 100% efficient only if the:

  1. Hot reservoir is at 0 K
  2. Hot reservoir is at 0 °C
  3. Cold reservoir is at 0 °C
  4. Cold reservoir is at 0 K

Answer: D

PMC Practice Test Temperature is defined by

  1. First law of thermodynamics
  2. Zeroth law of thermodynamics
  3. Second law of thermodynamics
  4. Third law of thermodynamics

Answer: B

PMC Practice Test A body at absolute temperature T radiates heat in proportion to:

  1. T²
  2. T⁴
  3. T⁻⁴
  4. None of these

Answer: B

PMC Practice Test If the system goes from two different paths to same final state then change in internal energy for both systems is.

  1. Same
  2. Different
  3. May be same
  4. Not enough information

Answer: A

PMC Practice Test In which of the following processes the heat is neither absorbed nor released by a system?

  1. Isochoric
  2. Isothermal
  3. Adiabatic
  4. Isobaric

Answer: C

PMC Practice Test An engine works between 727 °C and 227 °C. Its maximum possible efficiency is:

  1. 1/2
  2. 1/4
  3. 3/4
  4. 1

Answer: A

PMC Practice Test The work done in an adiabatic process when a gas cools from T₁ to T₂ is:

  1. NR(T₁ − T₂)/(γ − 1)
  2. NR(T₂ − T₁)/(γ − 1)
  3. NR(T₂ − T₁)
  4. R(T₂ − T₁)

Answer: A

PMC Practice Test A gas expands by 0.25 m³ at a constant pressure of 10³ N/m². The work done is:

  1. 0.25 erg
  2. 25 erg
  3. 250 J
  4. 250 W

Answer: C

PMC Practice Test According to the first law of thermodynamics:

  1. DQ = dW − dU
  2. DQ = dU
  3. DQ = dU + dW
  4. DQ = dW

Answer: C

PMC Practice Test Which quantity remains constant in an isothermal process of an ideal gas?

  1. Total heat
  2. Work done
  3. Entropy
  4. Internal energy

Answer: D

PMC Practice Test Work done in an isobaric process is given by:

  1. P dT
  2. P dV
  3. V dP
  4. P² dV

Answer: B

PMC Practice Test A heat reservoir is a ___-temperature bath.

  1. Constant
  2. Variable
  3. Zero
  4. High

Answer: A

PMC Practice Test The zeroth law of thermodynamics is related to:

  1. Work
  2. Energy
  3. Thermal equilibrium
  4. Entropy

Answer: C

PMC Practice Test If 1.002 × 10⁶ J of heat melts some ice at 0 °C (L = 3.34 × 10⁵ J/kg), the mass of ice is:

  1. 1 kg
  2. 2 kg
  3. 3 kg
  4. 4 kg

Answer: C

PMC Practice Test Energy can be transferred to a system by:

  1. Heat
  2. Work
  3. Heat and work
  4. Force

Answer: C

PMC Practice Test The change in internal energy in a cyclic process is always:

  1. Unity
  2. Zero
  3. Positive
  4. Negative

Answer: B

PMC Practice Test If the absolute temperature of the Sun were doubled, the heat energy reaching Earth would become:

  1. Three times
  2. Sixteen times
  3. Four times
  4. Same

Answer: B

PMC Practice Test The triple point of water is:

  1. 1 K
  2. 100 K
  3. 273.16 K
  4. 0 K

Answer: C

PMC Practice Test An adiabatic process can be described by:

  1. PV^γ = constant
  2. PV^γ = RT
  3. P/V^γ = constant
  4. PV^γ = nRT

Answer: A

The first law of thermodynamics can be written as:

  1. Q = ΔU − W
  2. Q = W − ΔU
  3. Q = ΔU × W
  4. Q = ΔU + W

Answer: D

Heat supplied = increase in internal energy + work done by the system.

In an isothermal process, which quantity remains constant?

  1. Heat content
  2. Pressure
  3. Temperature
  4. Volume

Answer: C

'Iso-thermal' means constant temperature.

In an adiabatic process:

  1. Volume remains constant
  2. Temperature remains constant
  3. No heat enters or leaves the system
  4. Pressure remains constant

Answer: C

Q = 0, so ΔU = −W.

The efficiency of a Carnot engine working between 500 K and 300 K is:

  1. 40%
  2. 60%
  3. 20%
  4. 100%

Answer: A

η = 1 − T_cold/T_hot = 1 − 300/500 = 0.4 = 40%.

A Carnot engine could be 100% efficient only if its cold reservoir were at:

  1. 0 °C
  2. 100 °C
  3. Room temperature
  4. 0 K

Answer: D

η = 1 − T_c/T_h equals 1 only when T_c = 0 K, which cannot be reached.

Entropy is a measure of the:

  1. Heat capacity only
  2. Pressure of a system
  3. Temperature of a system
  4. Disorder of a system

Answer: D

Natural processes tend to increase entropy (disorder).

For an ideal gas, internal energy depends only on its:

  1. Density
  2. Volume
  3. Pressure
  4. Temperature

Answer: D

Ideal gas molecules have no intermolecular forces, so U depends only on kinetic energy (temperature).

For one mole of an ideal gas, Cp − Cv equals:

  1. R
  2. R/2
  3. 2R
  4. Zero

Answer: A

This is Mayer's relation.

According to the second law of thermodynamics, heat cannot flow by itself from a:

  1. Cold body to a hot body
  2. Solid to a gas
  3. Gas to a solid
  4. Hot body to a cold body

Answer: A

External work is needed to move heat from cold to hot (as in a refrigerator).

A refrigerator works on the principle of a:

  1. Transformer
  2. 100% efficient Carnot engine
  3. Generator
  4. Heat engine running in reverse (heat pump)

Answer: D

It uses work to remove heat from the cold inside and release it outside.

Contact Form